Arcade Collecting > Merit/JVL Touchscreen

Horizontal size is too large and won't allow me to change

(1/4) > >>

OldSkoolGamer:
Hi everyone :)

I've got a 2nd Megatouch from a friend and found that the horizontal size is too wide and it wont allow me to change it using the pot. What would a fella do in a situation like that? Just replace the little monitor control board with all the pots on it?

smartbomb2084:
Probably bad Capacitors or transisitor controlling the circuit.. it could be a bad pot or broken wire going to or from it.

What kind of monitor is it?     

What kind of Megatouch is it?

DETAILS... DETAILS... DETAILS...   If you want help we need DETAILS.. 

My mind reading skills are a little cloudy today.

OldSkoolGamer:
Unsure of the monitor type...will check when I get home from work today :) but know its a sapphire maxx edition megatouch

lilshawn:

--- Quote from: OldSkoolGamer on August 12, 2013, 03:43:04 pm ---Unsure of the monitor type...will check when I get home from work today :) but know its a sapphire maxx edition megatouch

--- End quote ---

it should say on the tube or chassis "type 51" (or some other number)

likely you will need to re-cap the chassis. It's probably 20 years old now. it's going to be overdue.

smartbomb2084:
My money is on a TATUNG TYPE 66 monitor...

Navigation

[0] Message Index

[#] Next page