Arcade Collecting > Pinball

Help with Eightball Pin

(1/1)

spag256:
When I perform a solenoid test on my eightball pin the Outhole kicker,Side return kicker,Left,Right and bottom thumper bumpers,left and right slingshot and the coin lockout door solenoids don't respond. Only the Knocker,Chimes and flippers respond. I purchased a new solenoid driver module and the same solenoids don't respond. What can I do?

smartbomb2084:
Check the under-playfield mounted fuse located to the right of the right flipper assembly...

If it is good... Check for +43VDC at all of the playfield coils....

ChadTower:

Might want to look at the wiring diagram, too.  If those are all after a certain point in the wiring then you have a break in the circuit on the ground line.  If this is the case look at the ground line between the last working coil and the first dead one.

Dawgz Rule:
Just in case you don't have the schematics:

http://www.ipdb.org/search.pl

Navigation

[0] Message Index