| Main > Main Forum |
| GoldLeaf Pushbuttons? |
| (1/4) > >> |
| kuehnau:
Okay so when ordering more buttons and stuff for my controls, I accidentally ordered GoldLeaf Pushbuttons, instead of what I normally order. These are a little confusing because they only have TWO prongs instead of three and the tabs are smaller then the ones on the cherry micro switches. Can these be used with my other generic buttons and how do I know which tab is the ground? |
| Minwah:
Yes you can use with your other pushbuttons - it doesn't matter which contact you use as ground. It only matters with a microswitch because the is the NO and NC contact - the ground is common for both of those contacts. |
| keilmillerjr:
You accidentally ordered awesome buttons. :cheers: |
| kuehnau:
Okay, thanks for the info, I was worried for a second there I was going to need to order more buttons. |
| jdbailey1206:
I intentionally ordered these buttons. But in my haste forgot to order the smaller connectors. You need the 2.8 mm connectors instead of the standard 4.8 mm connectors. The only problem I fore see is having to either make your own harness or substitute the smaller connectors in your pre made chain. Which seems easy. They tend to give you enough slack to replace connectors. |
| Navigation |
| Message Index |
| Next page |