| Main > Main Forum |
| About to buy 1943, questions about jamma |
| << < (2/3) > >> |
| ionbasa:
Scratch that the component to--> VGA cable wont work, so I will have to use one of my older crt tvs. |
| CraftyMech:
If you want to use a PC compatible VGA CRT, what you need is one of these: http://www.ebay.com/itm/CGA-EGA-YUV-TO-VGA-arcade-video-converter-US-Seller-/321170765324?pt=LH_DefaultDomain_0&hash=item4ac744f60c They are cheap on eBay ($30+) and will take the 15k composite sync signal and convert it to 31K VGA. I have one of these converters and have tried it with a 1943 pcb, and it worked pretty well. It is still possible to find 15k CRTs, for instance I have an old Apple RGB monitor that I just picked up and works great on my test bench. The problem is a lot of older monitors were much smaller (15" or less), so they don't work that well for a cab where you want 19"+. The other option is an actual Arcade monitor (15k composite sync RGB monitor made for use in arcade cabinets), but they are open frame (without a case) and it is hard to find one without any burn-in and low operating hours. There are a lot of users here though that have arcade monitors in their cabs, check out the "Monitor/Video" sub-form. |
| ionbasa:
Well, it looks like I will have to get that board or the one from JROK: http://www.jrok.com/hardware/RGB.html to convert to YUV/S video so I can use it with my tv. I plan on picking up a studio monitor off eBay though which is a 20” Sony PVM-20M2U . This monitor supports RGB inputs + (negative) composite sync. I found out that there are a ton of studio monitors similar to this Sony one on eBay which range in price from $100 - $200. If anyone has any other suggestions please let me know! I should be receiving detailed pictures of the 1943 board soon, and ill upload here to see if people agree it is in good condition ( no missing eproms). |
| ionbasa:
Just got the pictures from the seller! I attached them in the post. I believe everything looks in order, so I am going to see if I can buy it later in the week/ next weekend. Its an hour drive from where I live, so it should be an interesting adventure ;D Now I have another question for someone who knows about the original cabinet designs? What type of cabinet did Capcom use? or did they only sell the boards and re-used cabinets? I have a link to cabinet designs: http://jakobud.com/plan-list.php Do any of the cabinets here match the original cabinets for the 1943 Battle of Midway game? |
| CraftyMech:
Looks legit! So how much are you paying for the board? Going rate on eBay has been $50-$75 |
| Navigation |
| Message Index |
| Next page |
| Previous page |