| Main > Main Forum |
| Dreamcast to Jamma? For Marvel vs Capcom 2 Arcade |
| << < (2/5) > >> |
| CoryBee:
--- Quote from: Malenko on July 21, 2013, 09:49:25 am ---Dreamcast to jamma? Why not just get a VGA box, snip the 31Hz wire, and wire up a couple of controller hacks? --- End quote --- I am going the xbox route now, but I thought of that and didn't want to pay the $ for it. I realized in my first post I posted an xbox 360 vga cable.....I cant find one for orig xbox...---steaming pile of meadow muffin--- |
| CoryBee:
So guys, how would you go about it? Turning an orig xbox into an arcade "board" that will replace a Marvel vs Capcom board in an arcade cabinet. |
| CoryBee:
I basically just need the xbox to output to the arcade monitor without much hassle. With parts that are in the USA. I can take care of pad hacking some controllers and providing an amp for the sound. :cheers: |
| keilmillerjr:
Here is one option for the xbox. http://www.ultimarc.com/xba.html --- Quote ---The X-Box Adaptor converts the output from the I-PAC (must be in PS/2 keyboard mode) into XBox commands. --- End quote --- Ultimarc no longer makes dreamcast adaptors. :o http://www.ultimarc.com/dreamcast.html --- Quote ---Dreamcast to JAMMA Adaptor Includes a sync separator circuit This adaptor is also the correct type for use with multi-frequency monitors which have a VGA plug (eg W-G D9500) These monitors should be connected direct to this adaptor in all cases, even if you have a J-PAC Click To Order To connect an PS to a JAMMA cabinet you need the following items: D-C Controls Adaptor D-C to J-PAC/Speaker Adaptor J-PAC with PS/2 keyboard cable option. see our main order page for this item. IMPORTANT INSTALLATION INSTRUCTION: When connecting this cable to the J-PAC you need to remove all of the frequency jumpers (ie 15, 25, 31) on the J-PAC, which allows all signals to pass through. Only later J-PAC boards have this facility. On older J-PAC boards you will need a replacement chip to enable this function. Please email for details. The picture below shows a complete console to JAMMA setup. --- End quote --- |
| CoryBee:
Will the j-pac handle all of this? |
| Navigation |
| Message Index |
| Next page |
| Previous page |