| Main > Main Forum |
| Lowest profile buttons needed!!! |
| (1/2) > >> |
| gurusi:
Hi, I have just received my ultralux blue led buttons for my x3 admin buttons (going under the control panel). I have already drilled the holes (wooden panel) and they clash with my top control panel buttons/microswitches! :angry: :hissy: There is no room for adjustment (tried altering the direction of the mircoswitches) and no room for moving them to another location... I did measure before hand but didn't account for the overlap of the panel when placed on the cab... I have tried a searching without joy for the lowest profile buttons that will fit a 28-30mm mounting hole. Can someone please recommend some buttons? I am UK based but happy to buy from USA. I would prefer a lit button, but at this point I dont mind if it doesn't! The thread height really doesn't matter as im happy to dremel the wood if needed. Thanks |
| gurusi:
Any thoughts on:- Seimitsu PS 14 KN 30mm Sanwa Pushbuttons OBSN-30 30mm Or alternatives? |
| chopperthedog:
http://www.ultimarc.com/goldleaf.html good day. |
| PL1:
--- Quote from: chopperthedog on June 26, 2013, 04:43:07 pm ---http://www.ultimarc.com/goldleaf.html good day. --- End quote --- IL / Goldleaf comparison -- installed on 3/4 MDF. Scott |
| gurusi:
Thanks for the advice! |
| Navigation |
| Message Index |
| Next page |