Author Topic: NephRings - Custom LED Joystick Lighting (Read 31605 times)

TopJimmyCooks · « **Reply #40 on:** August 15, 2013, 09:20:33 am »

Did Ms. Pac yelp a little bit when you put the Nip ring on her?

I kill myself. looks nice.

TKW4rr10r · « **Reply #41 on:** August 15, 2013, 09:23:21 am »

Quote from: TopJimmyCooks on August 15, 2013, 09:20:33 am

Did Ms. Pac yelp a little bit when you put the Nip ring on her?

I kill myself. looks nice.

And there goes my coffee, nice

TKW4rr10r · « **Reply #42 on:** August 21, 2013, 05:18:24 pm »

I'm really curious how the ring would look like with these:

http://www.tek-innovations.com/arthobbies/index.cfm?loc=products&cat=7&subcat=&item=96

Has anyone installed one with an above -clear- dust washer yet?

rablack97 · « **Reply #43 on:** August 21, 2013, 08:28:16 pm »

Quote from: TKW4rr10r on August 21, 2013, 05:18:24 pm

I'm really curious how the ring would look like with these:

http://www.tek-innovations.com/arthobbies/index.cfm?loc=products&cat=7&subcat=&item=96

Has anyone installed one with an above -clear- dust washer yet?

Page 1 of the thread it shows an example with a clear dust washer.

TKW4rr10r · « **Reply #44 on:** August 21, 2013, 10:20:20 pm »

Quote

Page 1 of the thread it shows an example with a clear dust washer.

Yeah I saw that pic, for some reason it didn't look clear to me. No worries.

Hopefully I'll be in a position to order more as one of my projects progresses.

deboru2 · « **Reply #45 on:** October 15, 2013, 09:45:15 pm »

Are these still available? I'd really like one.

Monkeyvoodoo · « **Reply #46 on:** October 15, 2013, 09:55:09 pm »

Me too. Been saving up my pennies. Metaphorically. Canada doesn't have pennies anymore.

Nephasth · « **Reply #47 on:** October 16, 2013, 09:20:01 am »

At this time, I've got 2 sets from previous orders that I need to complete. I will not be making any more through the end of the year. There is a slight possibility I'll do another run of these early next year.

TKW4rr10r · « **Reply #48 on:** October 17, 2013, 09:36:48 am »

Quote from: Nephasth on October 16, 2013, 09:20:01 am

At this time, I've got 2 sets from previous orders that I need to complete. I will not be making any more through the end of the year. There is a slight possibility I'll do another run of these early next year.

Keep me posted if/when you do start taking new orders. I know I'll have a few projects ready for them by early next year.

AmericanDemon · « **Reply #49 on:** December 03, 2013, 12:12:43 pm »

I just found this thread and got excited until it said you weren't making more.

mgb · « **Reply #50 on:** December 05, 2013, 06:50:24 pm »

You & me both.
I was gonna get them for a couple of them for my father son fight stick project but I'll have to come up with another way.

gbiscoo · « **Reply #51 on:** January 27, 2014, 08:09:09 pm »

Long time lurker, first time cab builder here.

Do you have any update on whether or not you'll be making another run of these Nephasth?

yotsuya · « **Reply #52 on:** January 27, 2014, 11:33:14 pm »

Seems like everyone wants these things....

Monkeyvoodoo · « **Reply #53 on:** January 27, 2014, 11:47:54 pm »

I'm almost tempted to start making them myself.

Nephasth · « **Reply #54 on:** January 27, 2014, 11:53:37 pm »

If I can get 20 or more, I'll do another run.

yotsuya · « **Reply #55 on:** January 27, 2014, 11:55:07 pm »

Yay! Sign me up for a set.

Nephasth · « **Reply #56 on:** January 28, 2014, 12:09:56 am »

...And it starts.

Yotsuya - 1

yotsuya · « **Reply #57 on:** January 28, 2014, 12:10:49 am »

Whoo hoo! Listening to "Big Balls" by AC/DC and celebrating the good news! What's the price?

Monkeyvoodoo · « **Reply #58 on:** January 28, 2014, 12:11:41 am »

I'm in for a pair as well (I really don't want to make them myself)

Nephasth · « **Reply #59 on:** January 28, 2014, 12:14:34 am »

Pricing is in the first post.

Yotsuya - 1
Monkeyvoodoo - 2

Total - 3

gbiscoo · « **Reply #60 on:** January 28, 2014, 01:52:01 am »

Fantastic! I'll be in for 5!

Nephasth · « **Reply #61 on:** January 28, 2014, 07:05:37 am »

Yotsuya - 1
Monkeyvoodoo - 2
gbiscoo - 5

Total - 8

Need the 20 by Feb 10th.

Malenko · « **Reply #62 on:** January 28, 2014, 07:38:07 am »

I'll take "another"

mgb · « **Reply #63 on:** January 28, 2014, 07:39:00 am »

You can definitely put me down for a pair of JLF nepth rings.

Nephasth · « **Reply #64 on:** January 28, 2014, 09:40:55 am »

Yotsuya - 1
Monkeyvoodoo - 2
gbiscoo - 5
Malenko - "1"
mtg - 2

Total - 11

Le Chuck · « **Reply #65 on:** January 28, 2014, 11:30:06 am »

I'm down for two, I'll need to use these with spinners, one TurboTwist2 and one TurboTwist Hi-Low. Do-able?

Nephasth · « **Reply #66 on:** January 28, 2014, 12:05:02 pm »

Quote from: Le Chuck on January 28, 2014, 11:30:06 am

I'm down for two, I'll need to use these with spinners, one TurboTwist2 and one TurboTwist Hi-Low. Do-able?

TurboTwist2, no. Hi-low, yes. But there will be an additional charge for initial design time.

TheOne · « **Reply #67 on:** January 28, 2014, 12:15:00 pm »

I'll take two also.

pbj · « **Reply #68 on:** January 28, 2014, 12:16:09 pm »

Can you do DDR squares?

Nephasth · « **Reply #69 on:** January 28, 2014, 12:22:22 pm »

Yotsuya - 1
Monkeyvoodoo - 2
gbiscoo - 5
Malenko - "1"
mgb - 2
ThrOne - 2

Total - 13

Quote from: pbj on January 28, 2014, 12:16:09 pm

Can you do DDR squares?

No soup for you!

TKW4rr10r · « **Reply #70 on:** January 28, 2014, 02:07:04 pm »

We're up to 13? Let's get this done people, I'm in for six.

Question is... when do you need the specifics and payment by? V-day is around the corner and some of us need to make sure our SO's are happy while trying to justify more projects

mgb · « **Reply #71 on:** January 28, 2014, 03:19:01 pm »

Quote from: TKW4rr10r on January 28, 2014, 02:07:04 pm

We're up to 13? Let's get this done people, I'm in for six.

Question is... when do you need the specifics and payment by? V-day is around the corner and some of us need to make sure our SO's are happy while trying to justify more projects

Then get 7.
The 20 mark will be hit and you can give the extra one to the mrs.
Tell her you bought her a ring.

Vigo · « **Reply #72 on:** January 28, 2014, 03:21:32 pm »

Quote from: mgb on January 28, 2014, 03:19:01 pm

Tell her you bought her a ring.

Le Chuck · « **Reply #73 on:** January 28, 2014, 04:15:37 pm »

Quote from: Nephasth on January 28, 2014, 12:05:02 pm

Quote from: Le Chuck on January 28, 2014, 11:30:06 am
I'm down for two, I'll need to use these with spinners, one TurboTwist2 and one TurboTwist Hi-Low. Do-able?

TurboTwist2, no. Hi-low, yes. But there will be an additional charge for initial design time.

Hrm, fair enough. Count me out for now....

STILL LOVE YOUR WORK!!!!

Nephasth · « **Reply #74 on:** January 28, 2014, 05:03:53 pm »

Yotsuya - 1
Monkeyvoodoo - 2
gbiscoo - 5
Malenko - "1"
mgb - 2
ThrOne - 2
TKW4rr10r - 6

Total - 19

Quote from: TKW4rr10r on January 28, 2014, 02:07:04 pm

Question is... when do you need the specifics and payment by? V-day is around the corner and some of us need to make sure our SO's are happy while trying to justify more projects

Taking "pre-orders" until 10th. If we hit 20 before then, great. If we go over, great. This isn't limited to just 20, that was just the number I needed to make it worth doing.

But payments will be due by the 17th. If at least 20 aren't paid for by the 17th, this won't happen, and refunds will be issued. In a few days I'll send out PMs asking for order specifics.

Sad thing is, out of all the ones I've sent out already, I only know of 1 that has been installed. $:-\$

yotsuya · « **Reply #75 on:** January 28, 2014, 05:06:20 pm »

Quote from: Nephasth on January 28, 2014, 05:03:53 pm

Sad thing is, out of all the ones I've sent out already, I only know of 1 that has been installed. $:-\$

NephRing hoarding, bro. These things are the Bitcoins of the BYOAC world!

Malenko · « **Reply #76 on:** January 28, 2014, 05:43:55 pm »

Quote from: yotsuya on January 28, 2014, 05:06:20 pm

Quote from: Nephasth on January 28, 2014, 05:03:53 pm
Sad thing is, out of all the ones I've sent out already, I only know of 1 that has been installed. $:-\$

NephRing hoarding, bro. These things are the Bitcoins of the BYOAC world!

not my fault.

Vigo · « **Reply #77 on:** January 28, 2014, 05:45:12 pm »

Mine is installed, and it looks amazing. Unfortunately, I am bone dry out of project cash. I don't have proper bolts or a proper dust washer for the Vigolix remodel. I couldn't justify taking a sad looking pic of it in action without proper hardware to go with it.

Nephasth · « **Reply #78 on:** January 28, 2014, 06:08:19 pm »

Quote from: Malenko on January 28, 2014, 05:43:55 pm

Quote from: yotsuya on January 28, 2014, 05:06:20 pm
Quote from: Nephasth on January 28, 2014, 05:03:53 pm
Sad thing is, out of all the ones I've sent out already, I only know of 1 that has been installed. $:-\$

NephRing hoarding, bro. These things are the Bitcoins of the BYOAC world!

not my fault.

Yeah man, that's my bad.

Quote from: Vigo on January 28, 2014, 05:45:12 pm

Mine is installed, and it looks amazing. Unfortunately, I am bone dry out of project cash. I don't have proper bolts or a proper dust washer for the Vigolix remodel. I couldn't justify taking a sad looking pic of it in action without proper hardware to go with it.

Now you HAVE to post a pic!

jmike · « **Reply #79 on:** January 28, 2014, 06:25:28 pm »

Guilty of hoarding a set

.
Honestly they wouldn't have worked with my current project.
But they will definitely be used in the next one.
Until then I get a


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news