| Main > Main Forum |
| Ultimarc MiniGrip Joystick rotate handle |
| (1/1) |
| GeoMan:
Has anyone rotated the Ultimarc MiniGrip handle, to look like this? If so, what needs to be removed to turn the handle 90o? Do i have to disassemble the handle? |
| PL1:
To change the orientation of the mounting plate from the long axis of the plate being on the X-axis to the Y-axis, just remove the 4 screws holding the mounting plate to the joystick base and turn it 90 degrees. Your picture shows 3 of the 4 screws. Scott EDIT: Also note that there are two tabs on the pivot that keep the stick from rotating. |
| GeoMan:
Thanks! |
| Navigation |
| Message Index |