| Software Support > Automated Projects |
| Getting ready to start rotating monitor setup |
| (1/2) > >> |
| epetti:
I've finally reached the point where I'm ready to start my rotating monitor setup for my cabinet. I've got an LG 20" 4:3 monitor that's already on a swivel stand so I know it's well centered. I was going to try DNA Dan's inspiring and very detailed setup here: http://forum.arcadecontrols.com/index.php/topic,110471.0.html but that changed directions a couple times and before I started I wanted to make sure that at least my shopping list for parts sounded right for making this thing. Here's what I've got so far: - lazy susan bearing, 3-4", such as found at vxb, but make sure that it's got clearance for the cable to pass through. - MDF, particle, or choice of material for a 23" round mounting board and 24" base plate (downsized an inch from DNA Dan's to fit my cabinet slightly better. - Screen door hinge or similar to force the wheel to stay on the turntable. - Polulu motor controller (so many choices -- 7A to 30A which to pick? I assume 7A is sufficient.) - USB A to Mini-B cable - Polulu metal gearmotor (ranges from 19:1 to 131:1 gearbox, once again which one to pick?) - Additional polulu supplies: wheel, crimp connectors, pins, bracket, hub. Did I miss anything? - Additional wood pieces for the 90 degree stops. - Various screws to attach everything. That seems like a complete shopping list based on the thread. Am I missing anything? Just about ready to dive off the deep end... :) And thank you in advance for going through all the trial and error to get to what seems like a fairly simple process at the end, including full HyperSpin setup. |
| darthpaul:
Limit switches? How are you going to rotate it, will it be automated? |
| epetti:
Sounded like the software that came with the polulu controller was able to detect a stop and stop the motor, so you didn't need a switch, just a stopper. That's the best of my understanding from the thread. I'm planning on rotating it by basically using a lazy Susan turned by a wheel powered by a motor, with physical stops, and have it driven automatically through Hyperspin and Autohotkey based on a list of which games are vertical. |
| epetti:
Ah, just found this thread which gives me the exact shopping list I was looking for: http://forum.arcadecontrols.com/index.php/topic,112424.0.html |
| darthpaul:
That make life much simpler if the controller can do that. |
| Navigation |
| Message Index |
| Next page |