Arcade lightgun recoil @ home + gun drive fix

Main > Lightguns

<< < (2/3) > >>

syntax_x:

syntax_x:
So my Time Crisis cab screen died and i decided to dedicate the gun to PS2, If anyone else decides to do this make sure to get the 5v feed for the sensor from BEFORE the guncon1/2 board.
Also put a diode coming directly off the guncon board trigger wire or the 555s wont discharge fast enough.

Now i need a second one for Vampire night XD

burn_654:
Sorry if this is a bit of a thread resurrection -

I'm interested in building at least the single-shot portion of your circuit for a solenoid gun, syntax_x. But I'm a little confused by your capacitor markings. Are the ones marked 470n, 470 nanofarads? And the ones marked 10nf, does that mean 10 nanofarads or microfarads?

If you see this, thanks for any help!

syntax_x:
Yo, the 10nf is one of those little round orange ceramic type ones dont even really need it hey..
the 470n are a squarish safety cap.
if you do wire one up use the guncons original lazer diode and circuitry or youll have issues calibrating.

mR_CaESaR:
Sorry to bring this thread back from the dead, but this is the only thread I've found online which does EXACTLY what I want to achieve - Namco recoil with a ps2 for single shot (time crisis, point blank) and rapid fire (crisis zone and time crisis 3)

Has anybody been able to complete the same thing as syntax?

I've recently acquired a Namco gun and have no idea where to start.

I've also got a guncon2 that I'll be using for the mod. I'm decent with a soldering iron, unfortunately I'm horrible at electrical diagrams.

Don't even know how to power the solenoid. Not sure if it works.

Any help would be appreciated

Sent from my SM-N950F using Tapatalk

Navigation

 Message Index

Go to full version