Main > Main Forum

Punch Out Custom Countertop

Pages: << < (2/2)

mgb:

Yeah, its definitely a cool project idea.
It's just a matter of working out the details.

That board from Mikesarcade is the inverter you would need.
you would need one per monitor

The punch out board set is, I beleive, 3 boards so there are 2 video boards. one video output to the top monitor and one to the bottom monitor.

Check out www.arcarc.xmission.com and grab a manual

bimm25e:

I opened a 13" VGA monitor at the office today (circa 1995 Samsung).  The only video input going to the monitor is a VGA (go figure).  Is there a converter (CGA to VGA) I can buy that is 1)not too expensive, 2)not going to induce video lag, 3) not going to create too much heat for a compact cabinet to handle.


I can't believe for one second that this will work correctly.
http://www.ebay.com/itm/Cga-to-Vga-or-Vga-to-Cga-Adapter-cga-vga-vga-cga-Arcade-Monitor-Converter/120967813463?_trksid=p2045573.m2102&_trkparms=aid%3D222004%26algo%3DSIC.NEO%26ao%3D1%26asc%3D15549%26meid%3D7704254798778916901%26pid%3D100034%26prg%3D7398%26rk%3D2%26sd%3D140538970948%26

koolmoecraig:

Fun idea but isn't that still going to be huge for a countertop?  Seems like 9" would be a nice sweet spot.

koolmoecraig:

I'll also add that a "cabaret" version of a Punch-Out!! machine would be badass.  Literally just a shrunken version of regular PO machine.  Just a thought.

Pages: << < (2/2)

Go to full version