Main > Main Forum
Control Panel
Vigo:
--- Quote from: TheMadMechanic on May 02, 2013, 02:18:42 pm ---
So I am guessing I can map the "pause" to the P1 & P2 button?
--- End quote ---
Yep! You can.
TheMadMechanic:
--- Quote from: PL1 on May 02, 2013, 02:39:53 pm ---The trackball and/or spinner will require an optical encoder. You can't use regular keyboard/gamepad encoders for them.
--- End quote ---
Ahhh that clears so much up!!! I'll go check out the optical encoders available. Hopefully it will work in tandem with the keywiz.
--- Quote from: PL1 on May 02, 2013, 02:39:53 pm ---If you have kids or drunk friends that will be playing on your cab, you may want to hide it well so you they don't mess up the settings too bad. ::)
--- End quote ---
;D Will certainly hide them wouldn't want some one who is losing to hit escape... unless I use it >:D
--- Quote from: PL1 on May 02, 2013, 02:39:53 pm ---
--- Quote from: TheMadMechanic on May 01, 2013, 05:09:31 pm ---- Do I really need the "tab" admin button? I don't really see myself using it.
--- End quote ---
--- Quote from: TheMadMechanic on May 01, 2013, 05:09:31 pm ---- Can I wire the "pause" to the P1 & P2 buttons and the"enter" to the coin1 & coin2 button? would this cause havoc with mame? Using mame 0.147
--- End quote ---
If you have the extra inputs, why not use dedicated buttons?
If you run other emulators besides MAME, a dedicated button will be easier to map/configure than a combo.
--- End quote ---
Just going to be running mame for now once I get it working will set up other emulators. so having a dedicated button will be usefull. Now to go rethink my layout for my CP.
TheMadMechanic:
--- Quote from: Vigo on May 02, 2013, 03:11:58 pm ---
--- Quote from: TheMadMechanic on May 02, 2013, 02:18:42 pm ---
So I am guessing I can map the "pause" to the P1 & P2 button?
--- End quote ---
Yep! You can.
--- End quote ---
Thanks Vigo ;D ;D you're super fast!!!
PL1:
--- Quote from: TheMadMechanic on May 02, 2013, 03:29:06 pm ---
--- Quote from: PL1 on May 02, 2013, 02:39:53 pm ---The trackball and/or spinner will require an optical encoder. You can't use regular keyboard/gamepad encoders for them.
--- End quote ---
Ahhh that clears so much up!!! I'll go check out the optical encoders available. Hopefully it will work in tandem with the keywiz.
--- End quote ---
Some trackballs/spinners come with their own encoder.
The optical encoders will work with the keywiz, no problem.
Scott
TheMadMechanic:
--- Quote from: PL1 on May 02, 2013, 03:47:22 pm ---
Some trackballs/spinners come with their own encoder. The optical encoders will work with the keywiz, no problem.
--- End quote ---
I am going for a stainless steel trackball in my cp, just waiting on a price. Have to wait and see if it is even affordable.