| Main > Main Forum |
| Control Panel |
| << < (3/9) > >> |
| yotsuya:
--- Quote from: TheMadMechanic on May 02, 2013, 07:24:32 pm ---I am going for a stainless steel trackball in my cp, just waiting on a price. Have to wait and see if it is even affordable. --- End quote --- :dizzy: I'd like to see that. :cheers: |
| TheMadMechanic:
--- Quote from: PL1 on May 02, 2013, 03:47:22 pm --- --- Quote from: TheMadMechanic on May 02, 2013, 03:29:06 pm --- --- Quote from: PL1 on May 02, 2013, 02:39:53 pm ---The trackball and/or spinner will require an optical encoder. You can't use regular keyboard/gamepad encoders for them. --- End quote --- Ahhh that clears so much up!!! I'll go check out the optical encoders available. Hopefully it will work in tandem with the keywiz. --- End quote --- Some trackballs/spinners come with their own encoder. The optical encoders will work with the keywiz, no problem. Scott --- End quote --- Scott thanks for the info!! After doing some research if a spinner and trackball come with it own encoder, and I would have a spinner & TB per CP, why do I need something like the Opti-wiz? How would mame deal with 2 spinners & 2tb? |
| PL1:
--- Quote from: TheMadMechanic on May 02, 2013, 09:45:14 pm ---After doing some research if a spinner and trackball come with it own encoder, and I would have a spinner & TB per CP, why do I need something like the Opti-wiz? How would mame deal with 2 spinners & 2tb? --- End quote --- There is a MAME setting for multi-mouse. If multi-mouse is enabled, each encoder is treated as a separate controller -- needed for 2 TB + 2 spinner setup. If multi-mouse isn't enabled, all inputs add together to influence the associated axis simultaneously. If you get the TT2, it comes with a modified Opti-Wiz that Randy can set it to Z-axis IIRC -- mail him for details. Be sure you get different USB Device Numbers for the 2 TT2/Opti-Wiz's. Randy also carries a trackball cable here for the Opti-Wiz. If you use Z-axis for spinners, you'll need to edit MAME like TopJimmyCooks mentions here. If you don't want to mess with Z-axis, you can do it with 3 encoders: 1. TB1 + Opti-Wiz 2. TB2 + Opti-Wiz 3. TT2 Master (X-axis) + Opti-Wiz + TT2 Slave (connect to Y-axis) Scott |
| TheMadMechanic:
--- Quote from: PL1 on May 02, 2013, 10:41:23 pm --- --- Quote from: TheMadMechanic on May 02, 2013, 09:45:14 pm ---After doing some research if a spinner and trackball come with it own encoder, and I would have a spinner & TB per CP, why do I need something like the Opti-wiz? How would mame deal with 2 spinners & 2tb? --- End quote --- There is a MAME setting for multi-mouse. If multi-mouse is enabled, each encoder is treated as a separate controller -- needed for 2 TB + 2 spinner setup. If multi-mouse isn't enabled, all inputs add together to influence the associated axis simultaneously. If you get the TT2, it comes with a modified Opti-Wiz that Randy can set it to Z-axis IIRC -- mail him for details. Be sure you get different USB Device Numbers for the 2 TT2/Opti-Wiz's. Randy also carries a trackball cable here for the Opti-Wiz. If you use Z-axis for spinners, you'll need to edit MAME like TopJimmyCooks mentions here. If you don't want to mess with Z-axis, you can do it with 3 encoders: 1. TB1 + Opti-Wiz 2. TB2 + Opti-Wiz 3. TT2 Master (X-axis) + Opti-Wiz + TT2 Slave (connect to Y-axis) Scott --- End quote --- Thanks!!! WOW you just made my cp journey easier. :notworthy: |
| TheMadMechanic:
Finally decided to add both a spinner and a TB to each cp. Now to figure out how I am going to incorporated a light gun (LG) also. I have read a lot of posts in forums relating to light guns and just have more questions. I read up on Aim trak LG and its got a lot of good reviews and works well. I am leaning towards getting the Aim trak kit and fitting up a gun. Just wanted to get an opinion. Are there any other alternative light gun choices? I heard a lot about TopGun is it an good? Thanks MM |
| Navigation |
| Message Index |
| Next page |
| Previous page |