I need some help with the gamepad hack....
I've done that many times with pc gamepads, but this one is a pain in the A..
As you can see on the picture:
1: I always solder on the big pasrt where the d-pad was on and that worked always very good and simple.
But on this one at position 2: where the action buttons are, there is not much room for solder.... when I clean the place to get hold the solder, there is noting under it to get a grip, only at the small dot at the correct place.
3: for the ground I use always the other half of the d-pad and that's do the job, or do I have to drill a whole in the middle of the d-pad?
4: Or do I have to clean up that little spot in between the circle, so I don't touch the ground area, and place a dot of solder there?
I had removed the triggers, but that was not a good idea, the menu was freaking out
At the end I insert a picture of the menu buttons, that's the only good news of tonight
So hopefully I get some tips and can I solder my second and last gamepad