Main > Driving & Racing Cabinets
lucisac's Model 2 setup guide
BadMouth:
--- Quote from: goingcheapnow on June 07, 2013, 11:54:58 pm ---HI've tried using a standard LAN cable and also a cross over cable. What am i doing wrong?
--- End quote ---
I haven't done it, but I'm pretty sure you need to connect both computers to a router, not just each other.
goingcheapnow:
Hi Malenko, i've set IPs for both machines and can now Ping to each, originally it was 1 way but now both ping to each other. all firewalls are off.
Badmouth, havent tried a router. might have to do that as nothing else is working, it doesnt seem to be searching for connection, just does the cancelled network board not present.
hmmm .. .frustrating :)
Brian74:
Example IP on PC 1 is 192.161.1.4 & PC 2 is 192.168.1.7 make PC 1 network ini 192.168.1.7 and PC 2 192.168.1.4 that is the loop. Make each on look for each other. I did it over wifi and there was bad lag.
Sent from my SGH-T989 using Tapatalk 2
Malenko:
--- Quote from: Brian74 on June 08, 2013, 11:08:52 pm ---Example IP on PC 1 is 192.161.1.4 & PC 2 is 192.168.1.7 make PC 1 network ini 192.168.1.7 and PC 2 192.168.1.4 that is the loop. Make each on look for each other. I did it over wifi and there was bad lag.
Sent from my SGH-T989 using Tapatalk 2
--- End quote ---
^This is the next step. If they can ping each other, then they can talk to each other. Set the ini's right and you should be good to go.
goingcheapnow:
we have success :) woohoo .... daytona work, sega rally works (Steering in menus vibrates way too much) but others having issues with working so will keep working on those...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version