| Main > Main Forum |
| U-Trak trackball not working in MAME |
| << < (3/4) > >> |
| Endprodukt:
Where? |
| Hutt:
DOH!! One more try http://wiki.arcadecontrols.com/wiki/Spinner_Turn_Count |
| Hutt:
Well, I spend the last couple days tinkering with odds and ends on this. Setting up LED blinky and so fourth. Went to play Centipede and Marble Madness again... NO TRACKBALL!!! It's not Hyperspin or LED Blinky in any way because if I just run MAME it still doesn't work. It doesn't even recognize the spinner in trackball games... at least before the spinner would move the marble left and right in Marble Madness. What could be causing this? What is really confusing me I can play Tempest just fine with the spinner or the trackball. Its frustrating when simple things that shouldn't be an issue give you problems.... |
| Endprodukt:
Look at the default settings to see if the trackball is still defined right. Mame is very sensitive with unplugging USB inputs and resets all default settings. If that's the case, set everything up and set default.cfg to read only. |
| Hutt:
--- Quote from: Endprodukt on April 09, 2013, 06:40:06 pm ---Look at the default settings to see if the trackball is still defined right. Mame is very sensitive with unplugging USB inputs and resets all default settings. If that's the case, set everything up and set default.cfg to read only. --- End quote --- Actually I did do that and trackball was set to keyboard again for some reason. Perhaps what you said. I changed it back to mouse but still didn't help. It HAS to be something simple. Can someone here using a trackball post their .cfg file? |
| Navigation |
| Message Index |
| Next page |
| Previous page |