| Software Support > Automated Projects |
| Wiring limit switch to pololu 18v7 |
| (1/1) |
| Connorsdad:
While I'm waiting for my motor to be delivered I thought I'd research how to connect the switches, motor and pololu 18v7 up. On the following Web page at the bottom, which diagram should I follow, left or right? http://www.pololu.com/docs/0J44/4.4 With regard to electronics I can just about wire a plug so please do advise on anything else that I need to do. |
| Midlife:
Follow the diagram on the left. One switch will connect to Analog input channel 1 and Pot - and the other to Analog input channel 2 and Pot -. |
| Connorsdad:
Thank you :) |
| Navigation |
| Message Index |