| Main > Project Announcements |
| Mission Control Project: 5 years on, what to do with the leftovers? |
| << < (142/362) > >> |
| Pixelhugger:
Here is the bullnose after sanding to 400grit. There are some router tracks here and there in the MDF as I made several passes to knock down some high spots. I'll sand those out. ::) |
| Pixelhugger:
And the result. These reflective things are really hard to capture in a picture (see token thread ;)) You can see how clear the edge polishes at the bottom of the hole in the second pic. There you are actually looking through the polished face. Clear as glass. |
| Pixelhugger:
--- Quote from: RetroACTIVE on December 08, 2005, 02:26:42 pm ---What kind of glue? --- End quote --- Yellow. But in retrospect (and for the rest of the cabinet glue up) I'd use something slower setting. I just can't take the stress! |
| RetroACTIVE:
--- Quote ---But in retrospect (and for the rest of the cabinet glue up) I'd use something slower setting --- End quote --- Thats why I asked... when you said "run like mad" you made me curious. |
| Pixelhugger:
Well, it was run like mad for two reasons- 1. The class was ending and I was about to get locked out. :P 2. I wasn't sure how much setting could happen before it'd leave a film (or worse) on the plexi. After the polishing on the lexan I was really concerned about having to polish any large areas on the plexi. I just didn't know if semi-set glue could be removed. |
| Navigation |
| Message Index |
| Next page |
| Previous page |