| Main > Project Announcements |
| Mission Control Project: 5 years on, what to do with the leftovers? |
| << < (140/362) > >> |
| papercut:
--- Quote from: teef two on December 02, 2005, 08:28:00 am ---Jealous of cabs already built, unsure of his next step, --- End quote --- Grammar Police! Grammar Police! Should be Envious of cabs already built, as you can only be jealous of something you HAVE but you ENVY that which you do not have. However, let me say, Brilliant Homage! And for that you may write this poem As You Like It. |
| dfmaverick:
I was over at Target the other day looking at Christmas lights, and I noticed that they had a set of mini LED Christmas lights for $4.99. They run off batteries and may have a possible usage by you or someone else. They aren't located by all the Christmas lights but over by the extension cords, shingle clips, replacement bulbs area. Small silver box about 3" x 3". Comes all white or multicolored. Looks like you could hack them out easily enough if you'd like to go that route. Attached is a pic I found of them. |
| Pixelhugger:
I tried the flame polishing, which worked for most of the scratched surface. Unfortunately I overheated a few areas and got some crackling on the surface. So I've rebuilt the CP, acrylic for the top this time, with MDF for the panel. Tomorrow I'm hoping to finish it up with the trackball hole, bullnosing and polishing. If all goes well I'll get the trim on the bow front and be ready to install the art and wire it up.; |
| DrewKaree:
--- Quote from: Pixelhugger on December 06, 2005, 03:12:11 pm ---So I've rebuilt the CP, acrylic for the top this time, with MDF for the panel. Tomorrow I'm hoping to finish it up with the trackball hole, bullnosing and polishing. If all goes well I'll get the trim on the bow front and be ready to install the art and wire it up.; --- End quote --- All I heard was "blah blah blah I have no pictures blah blah blah" ;) |
| Mark70:
--- Quote from: DrewKaree on December 06, 2005, 05:01:25 pm --- --- Quote from: Pixelhugger on December 06, 2005, 03:12:11 pm ---So I've rebuilt the CP, acrylic for the top this time, with MDF for the panel. Tomorrow I'm hoping to finish it up with the trackball hole, bullnosing and polishing. If all goes well I'll get the trim on the bow front and be ready to install the art and wire it up.; --- End quote --- All I heard was "blah blah blah I have no pictures blah blah blah" ;) --- End quote --- when I say lol. I mean this time I actually lol'd |
| Navigation |
| Message Index |
| Next page |
| Previous page |