| Main > Main Forum |
| Coin Door light - options? |
| (1/1) |
| Richardgregory:
Hi folks: I picked up an old cabinet that has a coin door, but it's been gutted. I'm in the process of rebuilding it. I'm curious to know what options I have in terms of wiring some lights to the coin door to illuminute the 25 cents logo. I'm thinking of a JAMMA board, and not a PC, so the power will need to come from the power supply of the PCB. Thanks! |
| lilshawn:
most jamma harnesses in cabinets are already wired for bulbs to light up the coin slots...so it should already have a wire going there supplying 12 volts. if you don't have sockets, you can get "wedge" style holders that just clip on to the coin runner on the top or on a tab built onto the top or you can retrofit one and attach with a screw (depends on your door style and how old it is.) Coin Control tab style are Happ number 891-1117-00 runner style lampholders are Happ number 42-0351-00D |
| micahman33:
Honestly, I didnt even mess with the original lighting harness even though my coindoor came with one. I bought a bunch of USB powered flex-lights off amazon and use that to light both coin buttons and my marquee. They are low power consumption/low heat, required no fancy wiring, and look great. |
| mcseforsale:
Some of the older coin doors are running 14 volt bulbs. You may have to replace those with automotive wedge bulbs and that's it. AJ |
| ids:
Build your own! ;D http://forum.arcadecontrols.com/index.php/topic,110325.msg1168817.html#msg1168817 |
| Navigation |
| Message Index |