Main > Main Forum

Silver Strike Bowling shows NO SIGNAL on monitor

Pages: << < (2/3) > >>

ed12:

hi
ya na na the na na  :cheers:
u can by-pass the crt by just hooking a lcd to the vga out of the video card
if u are not getting video there ? any ati video card will work
they are not like our other problem childern :)

ed

stpcore:

I tried another monitor and still received NO SIGNAL.  It's funny because if I remove the battery from the motherboard for 20 minutes or so and put it back in it will occasionally boot to the IT screen.  But if I turn it off for a few minutes and turn it back on...NO SIGNAL.  I replaced that battery with a new one but it was sitting in cold weather so I'm wondering if it drained it somehow.  So you say ANY video card will work?  I thought the Nighthawks were picky on hardware, no?

ed12:

hi
not really
there perty robust
it's gaming loaded them with just about every ati file there was
less a few newer 1's

ed

Vigo:

Sorry to necro this thread. I just picked up a SSB 09 and am having a similar issue. Stpcore, were you able to resolve this? did it need a new video card?

stpcore:


--- Quote from: Vigo on October 13, 2014, 03:54:25 pm ---Sorry to necro this thread. I just picked up a SSB 09 and am having a similar issue. Stpcore, were you able to resolve this? did it need a new video card?

--- End quote ---

Man, I don't remember what I did to get that one going.  I've owned 9 or 10 Silver Strikes over the past few years and about half of them had little issues.  I do have spare video cards for the Silver Strikes.  If you want I can ship one to you and you can see if that clears up your issue.  Is your only problem the "NO SIGNAL"?  Did you try to connect it to a VGA input on a monitor to see if you get a pic (not sure if you are using the JAMMA for video or not)?

Pages: << < (2/3) > >>

Go to full version