| Main > Main Forum |
| Silver Strike Bowling shows NO SIGNAL on monitor |
| << < (2/3) > >> |
| ed12:
hi ya na na the na na :cheers: u can by-pass the crt by just hooking a lcd to the vga out of the video card if u are not getting video there ? any ati video card will work they are not like our other problem childern :) ed |
| stpcore:
I tried another monitor and still received NO SIGNAL. It's funny because if I remove the battery from the motherboard for 20 minutes or so and put it back in it will occasionally boot to the IT screen. But if I turn it off for a few minutes and turn it back on...NO SIGNAL. I replaced that battery with a new one but it was sitting in cold weather so I'm wondering if it drained it somehow. So you say ANY video card will work? I thought the Nighthawks were picky on hardware, no? |
| ed12:
hi not really there perty robust it's gaming loaded them with just about every ati file there was less a few newer 1's ed |
| Vigo:
Sorry to necro this thread. I just picked up a SSB 09 and am having a similar issue. Stpcore, were you able to resolve this? did it need a new video card? |
| stpcore:
--- Quote from: Vigo on October 13, 2014, 03:54:25 pm ---Sorry to necro this thread. I just picked up a SSB 09 and am having a similar issue. Stpcore, were you able to resolve this? did it need a new video card? --- End quote --- Man, I don't remember what I did to get that one going. I've owned 9 or 10 Silver Strikes over the past few years and about half of them had little issues. I do have spare video cards for the Silver Strikes. If you want I can ship one to you and you can see if that clears up your issue. Is your only problem the "NO SIGNAL"? Did you try to connect it to a VGA input on a monitor to see if you get a pic (not sure if you are using the JAMMA for video or not)? |
| Navigation |
| Message Index |
| Next page |
| Previous page |