Main > Project Announcements
'MIGHTY CADE' Bartop (21,3 inch lcd) 100%
Almighty:
HLSL?
just a lcd with slg3000
eldiau:
I guess you are not getting any picture because the slg is not passing the edid info from the monitor to the pc, if you are using linux or win 7 you could try to download edid and save them on the pc. Anyway I wouldn't bother with a scanline generator, unless you plan to use a real PCB (like a neogeo MVS), go for software scanlines. Set the resolution to the native LCD and use "effect" in mame with a good overlay picture or HLSL if you have a powerful gfx card. I think MAME effect does e better job then slg if your LCD does 1280x1024 or more... and much cheaper!
eldiau:
... just forgot you get one more bonus over SLG:
- with effect your scan lines get the correct rotation on vertical games
- with HLSL you get rotation and many other goodies like screen deformation, color bleeding, flickering etc...
Almighty:
--- Quote from: eldiau on March 18, 2013, 03:40:27 am ---I guess you are not getting any picture because the slg is not passing the edid info from the monitor to the pc, if you are using linux or win 7 you could try to download edid and save them on the pc. Anyway I wouldn't bother with a scanline generator, unless you plan to use a real PCB (like a neogeo MVS), go for software scanlines. Set the resolution to the native LCD and use "effect" in mame with a good overlay picture or HLSL if you have a powerful gfx card. I think MAME effect does e better job then slg if your LCD does 1280x1024 or more... and much cheaper!
--- End quote ---
thanks for the feedback!
I am using windows xp and my card is 512mb Ati card.
pc spec's: P4 dual core E4300/3Gb/160Gb/DVDRW/X1650.
Where can i download/find a good overlay for mame, because never tried that and i tought it was easier too use a SLG ;)
And do i have to chance the mame ini file?
My max resolution for the lcd is 1600X1200 (4:3)
Second layer glossy White and this looks freaking awesome!
And i am using these on the top/back:
I think this wil look great when the Bartop is on, glossy White, blue buttons/bubble baltop and led blue led fan's. ( and a blue marquee)
Drnick:
Very nice job, Are you spraying the paint?
Have you got a way of controlling the speed for the fan's If not I would highly recommend you get one. 2 of those fans at 1800 RPM kick up a lot of noise. Tweak them back to about 1200 and they are lovely. I'm sure someone here could tell me how to do it with some wire and resisitors but the £2 for a speed controller was worth it.
If you haven't already purchased then try something like these which have a built in controller.
http://www.ebay.co.uk/itm/Adjustable-RPM-Speed-80mm-8cm-Blue-4-LED-Computer-Case-Cooling-Fan-Controller-/160843340153?pt=US_Computer_Case_Fans&hash=item2573029979
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version