Main > Retail vendors
CNC Cut Bartop Kits - Orders Open! New Models Available!
fvargasfrank:
Are the plans for the bars-stick available? I went to the site but it's no longer active.
PL1:
--- Quote from: fvargasfrank on March 21, 2022, 11:38:39 pm ---Are the plans for the bars-stick available? I went to the site but it's no longer active.
--- End quote ---
The Internet Wayback Machine has a backup.
KADE forum thread:
https://web.archive.org/web/20160826064217/http://kadevice.com/forum/viewtopic.php?f=51&t=325&sid=974d29dde242837119d3b7e021bf551d
Direct download link for plans:
https://web.archive.org/web/20201016110043/https://d126d645-a-62cb3a1a-s-sites.googlegroups.com/site/kadevice/cnc-templates/barstick_prototype_plans_by_degenatrons.dwg?attachauth=ANoY7coxoqZJJ9H95JksV28RalTPsqmU3tsgP2QEQ_2lEcPHwk81remiaxtoZHS5WDGYZklqpTcg9UBtRqEfMgzJXXJDuSUjbX1yMvayUpVrrfI0mOYWz7iaY239RjlipQNy4Rf4_bxvPSKsPiLzkVXfMlNJkoXXmkKaTGDriDkRtZK75zc7E0UgcaJyL3O65dsRBr-vaHGopHTzHMw5gID3he_oCHUWAzbw_dunKL0isXihI4BKgVwBdEsPyzRqdw8ejNohB6F4Iis3LF_9XK49xjJSEKIHLA%3D%3D&attredirects=0
Scott
fvargasfrank:
--- Quote from: PL1 on March 22, 2022, 06:32:12 am ---
--- Quote from: fvargasfrank on March 21, 2022, 11:38:39 pm ---Are the plans for the bars-stick available? I went to the site but it's no longer active.
--- End quote ---
The Internet Wayback Machine has a backup.
KADE forum thread:
https://web.archive.org/web/20160826064217/http://kadevice.com/forum/viewtopic.php?f=51&t=325&sid=974d29dde242837119d3b7e021bf551d
Direct download link for plans:
https://web.archive.org/web/20201016110043/https://d126d645-a-62cb3a1a-s-sites.googlegroups.com/site/kadevice/cnc-templates/barstick_prototype_plans_by_degenatrons.dwg?attachauth=ANoY7coxoqZJJ9H95JksV28RalTPsqmU3tsgP2QEQ_2lEcPHwk81remiaxtoZHS5WDGYZklqpTcg9UBtRqEfMgzJXXJDuSUjbX1yMvayUpVrrfI0mOYWz7iaY239RjlipQNy4Rf4_bxvPSKsPiLzkVXfMlNJkoXXmkKaTGDriDkRtZK75zc7E0UgcaJyL3O65dsRBr-vaHGopHTzHMw5gID3he_oCHUWAzbw_dunKL0isXihI4BKgVwBdEsPyzRqdw8ejNohB6F4Iis3LF_9XK49xjJSEKIHLA%3D%3D&attredirects=0
Scott
--- End quote ---
Thank you very much, did not know of suck sorcery as internet wayback lol.
busbeepbeep:
@haruman, I built a Widescreen EVO XR2 a few years back. Have an issue with the control panel and the barrel hinges. When playing fighting games with lesser experienced players who are rough with the joystick, the control panel starts to pull away from the bartop. The magnets aren't strong enough and I guess the holes for the barrel hinges have loosened.
Any suggestions on ways to secure the control panel? Even if I lose ability to quickly access the internals, that would be ok with me if find a way to way secure the CP and enjoy playing more.
HaRuMaN:
You could always put a couple of bolts through the admin panel and the panel behind it...
Navigation
[0] Message Index
[*] Previous page
Go to full version