April 16, 2024, 03:12:40 pm
Home
Help
Search
Login
Register
News:
Support this site
Shop
Amazon Arcade Stuff
through our link. Thank you!
Forum notices to gmail.com addresses are working. Microsoft addresses are still not.
The NEW Build Your Own Arcade Controls
|
Software Support
|
controls.dat
(Moderator:
SirPoonga
) |
Servo Stick and LED-Blinky (in Hyperspin)
Main
Restorations
Software
Audio/Jukebox/MP3
Everything Else
Buy/Sell/Trade
Project Announcements
Monitor/Video
GroovyMAME
Merit/JVL Touchscreen
Meet Up
Retail Vendors
Driving & Racing
Woodworking
Software Support Forums
Consoles
Project Arcade
Reviews
Automated Projects
Artwork
Frontend Support Forums
Pinball
Forum Discussion
Old Boards
Raspberry Pi & Dev Board
controls.dat
Linux
Miscellaneous Arcade
Wiki Discussion
Old Archives
Lightguns
Arcade1Up
Try the site in https mode
Site News
Unread posts
|
New Replies
|
Recent posts
|
Rules
|
Chatroom
|
Wiki
|
File Repository
|
RSS
|
Submit news
« previous
next »
Send this topic
Print
Pages: [
1
]
Go Down
Author
Topic: Servo Stick and LED-Blinky (in Hyperspin) (Read 11847 times)
0 Members and 1 Guest are viewing this topic.
Endprodukt
Trade Count:
(
0
)
Full Member
Offline
Posts: 688
Last login:November 14, 2023, 12:54:43 pm
I want to build my own arcade controls!
Servo Stick and LED-Blinky (in Hyperspin)
«
on:
February 01, 2013, 03:08:24 pm »
LedBlinky is supposed to work with the Servo Stick but it just doesn't switch between 4/8-way. I activated it through the led blinky configurator under "misc" but it's still not switching. Am I missing something?
Logged
arzoo
Trade Count:
(
+1
)
Full Member
Offline
Posts: 2092
Last login:April 14, 2024, 11:15:11 am
Robots WILL kill you.
Re: Servo Stick and LED-Blinky (in Hyperspin)
«
Reply #1 on:
February 07, 2013, 12:18:52 pm »
Hi,
Turn on the Debug Log and Verbose options (on the Misc Options tab), start your FE and run a game or two that should be 4-way and 8-way. Email me the debug.ZIP file and I'll take a look.
Logged
Robots
will
kill you.
Arcade Addiction
Endprodukt
Trade Count:
(
0
)
Full Member
Offline
Posts: 688
Last login:November 14, 2023, 12:54:43 pm
I want to build my own arcade controls!
AW: Servo Stick and LED-Blinky (in Hyperspin)
«
Reply #2 on:
February 08, 2013, 11:15:23 am »
Its working now, thanks
Logged
Nephasth
Guest
Trade Count:
(
0
)
Re: Servo Stick and LED-Blinky (in Hyperspin)
«
Reply #3 on:
February 08, 2013, 12:17:02 pm »
Please share what the issue was. Might help out others some day.
Logged
Endprodukt
Trade Count:
(
0
)
Full Member
Offline
Posts: 688
Last login:November 14, 2023, 12:54:43 pm
I want to build my own arcade controls!
AW: Servo Stick and LED-Blinky (in Hyperspin)
«
Reply #4 on:
February 08, 2013, 12:48:34 pm »
I'm not sure actually. I activated the servo stick in the ledblinky config and it didn't switch. I tried the software from ultimarc and it worked right away but still not through led Binky and hyperspin. It worked after a system reboot just fine. I had to adjust my default configuration for mame to 8 way Joysticks and set it to primary so any unknown game would use it. I really like that ledblinky sets to 4way in hyperspin
Logged
Send this topic
Print
Pages: [
1
]
Go Up
« previous
next »
The NEW Build Your Own Arcade Controls
|
Software Support
|
controls.dat
(Moderator:
SirPoonga
) |
Servo Stick and LED-Blinky (in Hyperspin)