Software Support > controls.dat

Servo Stick and LED-Blinky (in Hyperspin)

(1/1)

Endprodukt:
LedBlinky is supposed to work with the Servo Stick but it just doesn't switch between 4/8-way. I activated it through the led blinky configurator under "misc" but it's still not switching. Am I missing something?

arzoo:
Hi,
Turn on the Debug Log and Verbose options (on the Misc Options tab), start your FE and run a game or two that should be 4-way and 8-way. Email me the debug.ZIP file and I'll take a look.

Endprodukt:
Its working now, thanks :)

Nephasth:
Please share what the issue was. Might help out others some day.

Endprodukt:
I'm not sure actually. I activated the servo stick in the ledblinky config and it didn't switch. I tried the software from ultimarc and it worked right away but still not through led Binky and hyperspin. It worked after a system reboot just fine. I had to adjust my default configuration for mame to 8 way Joysticks and set it to primary so any unknown game would use it. I really like that ledblinky sets to 4way in hyperspin :)

Navigation

[0] Message Index