Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Servo Stick and LED-Blinky (in Hyperspin)  (Read 3433 times)

0 Members and 1 Guest are viewing this topic.

Endprodukt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 614
  • I want to build my own arcade controls!
Servo Stick and LED-Blinky (in Hyperspin)
« on: February 01, 2013, 03:08:24 pm »
LedBlinky is supposed to work with the Servo Stick but it just doesn't switch between 4/8-way. I activated it through the led blinky configurator under "misc" but it's still not switching. Am I missing something?

arzoo

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1788
  • We are not in the 8th dimension. We are over NJ.
    • LEDBlinky
Re: Servo Stick and LED-Blinky (in Hyperspin)
« Reply #1 on: February 07, 2013, 12:18:52 pm »
Hi,
Turn on the Debug Log and Verbose options (on the Misc Options tab), start your FE and run a game or two that should be 4-way and 8-way. Email me the debug.ZIP file and I'll take a look.
Robots will kill you.



Arcade Addiction

Endprodukt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 614
  • I want to build my own arcade controls!
AW: Servo Stick and LED-Blinky (in Hyperspin)
« Reply #2 on: February 08, 2013, 11:15:23 am »
Its working now, thanks :)

Nephasth

  • Guest
  • Trade Count: (0)
Re: Servo Stick and LED-Blinky (in Hyperspin)
« Reply #3 on: February 08, 2013, 12:17:02 pm »
Please share what the issue was. Might help out others some day.

Endprodukt

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 614
  • I want to build my own arcade controls!
AW: Servo Stick and LED-Blinky (in Hyperspin)
« Reply #4 on: February 08, 2013, 12:48:34 pm »
I'm not sure actually. I activated the servo stick in the ledblinky config and it didn't switch. I tried the software from ultimarc and it worked right away but still not through led Binky and hyperspin. It worked after a system reboot just fine. I had to adjust my default configuration for mame to 8 way Joysticks and set it to primary so any unknown game would use it. I really like that ledblinky sets to 4way in hyperspin :)

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31