Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**  (Read 15992 times)

0 Members and 1 Guest are viewing this topic.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Hello All,

I have some refurbished Happs 3" trackballs and accessory parts for sale. 

All trackballs were pulled apart, washed, bearings re-oiled by vaccuum pressure, trackballs scrubbed back to a nice white.

All tested and working...

PM me for package quotes if interested...



TBall PS2/USB Encoders - Works with Spinners Too!



Clear Trackball Replacements



Clear T-Ball Led Mods



T-Ball 3" mounting plates - Brand New



Refurbished White T-Ball Replacements


« Last Edit: October 06, 2013, 01:45:19 pm by rablack97 »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

brained

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 447
  • Raised by Atari
    • Nux
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #1 on: January 24, 2013, 11:24:12 pm »
Sorry to hijack your thread, but how did you manage to get the whiteness from the trackballs again?. I just happened to ask that question a couple of hours ago. Again, sorry for the hijack.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #2 on: January 25, 2013, 08:30:19 am »
Soap and water and a towel, they werent super filthy.....

Also try a bleach solution or take some comet and put it in water make slurry and clean it with that.....

Maybe use that tub and tile cleaner.....i think its called bleach white....The trackballs are durable so basically anything with a little bleach should do the trick....
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

brained

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 447
  • Raised by Atari
    • Nux
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #3 on: January 25, 2013, 08:54:23 am »
Thanks a lot, I'll give it a try :)

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #4 on: February 05, 2013, 11:11:14 pm »
still have a few left.....bump.....

Also, if interested I can mod these with a clear trackball with rgb leds....
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #5 on: February 14, 2013, 12:29:27 pm »
BUMPITY BUMP
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

nipsmg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1191
  • ROONEY!! ERRGH!!
    • Arcadia
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #6 on: February 14, 2013, 02:40:41 pm »
Just want to say I got mine, and it's in great condition and works awesome (way better than my beat up one)!  If you're thinking about getting a trackball at all, get one of these that are like-new and save like $50.


chopperthedog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 930
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #7 on: February 14, 2013, 06:27:17 pm »
* chopperthedog echos above statement. But ordered for a back up or future project.


good day.



rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #8 on: February 25, 2013, 10:28:04 pm »
Getting more of these tomorrow....

I'm also working on a simple ps/2 usb interface board as an attachment to the harness, so you can attach these to a PC.  PS/2 is tested and working, just waiting on parts for the USB....

Will update as i test further.....
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

fudgeyall

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • I want to build my own arcade controls!
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #9 on: February 28, 2013, 02:48:31 pm »
Getting more of these tomorrow....

I'm also working on a simple ps/2 usb interface board as an attachment to the harness, so you can attach these to a PC.  PS/2 is tested and working, just waiting on parts for the USB....

Will update as i test further.....

When you get the USB interface working how much are you going to charge?

Le Chuck

  • I want a new quote!
  • Wiki Contributor
  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5358
  • Yots is an Arrogant Tallywacker
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #10 on: February 28, 2013, 02:51:58 pm »
I'm down for a PS2 - price still $35?

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #11 on: February 28, 2013, 03:00:36 pm »
Not sure yet, I'd like to test the setup first before tossing out prices.  I hope to have a dual interface for both USB and PS/2 all combined including the 3 buttons.  I assure you it will be well below what the mainstream USB PS/2 adaptor boards go for on the Happs trackballs.

Once i get a working prototype, i'll probably sell the interface seperately as well.....

Still waiting on parts, will update the thread as I get more information..

Also looking at clear trackball mods with rgb led lighting.

   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #12 on: February 28, 2013, 03:01:54 pm »
Sending you a PM Chuck
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16912
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #13 on: February 28, 2013, 03:07:04 pm »
I might be interested in one of these, but I don't need PS/2-USB, as long as it has the red interface card.
***Build what you dig, bro. Build what you dig.***

Le Chuck

  • I want a new quote!
  • Wiki Contributor
  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5358
  • Yots is an Arrogant Tallywacker
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #14 on: February 28, 2013, 03:09:01 pm »

Also looking at clear trackball mods with rgb led lighting.

And I'm hooked.  Once you get it tested out I'm down for one for sure, maybe two. 

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #15 on: February 28, 2013, 03:17:11 pm »
I might be interested in one of these, but I don't need PS/2-USB, as long as it has the red interface card.

LOL, thats all i have is red....

I have one lowly green one, in timeout all alone...

Oh yeah, also for a few bucks more I can also send out a set of new bearings.....

So basically, your doubling the life of the thing....

   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16912
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #16 on: February 28, 2013, 03:53:45 pm »
Cool. Put one aside for me. I'll let you know on Monday or so (I'm getting a Centipede control panel and if it needs a new TB, which I think it does, I'll be getting one from you).

So what's the NFC East Homeboy Discount?  :cheers:
***Build what you dig, bro. Build what you dig.***

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #17 on: February 28, 2013, 06:33:58 pm »
$35.00 Cowboy blue....
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16912
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #18 on: February 28, 2013, 06:50:59 pm »
Take a dollar off for every playoff game Tony Romo has won. Oh wait, that's only like a buck.
***Build what you dig, bro. Build what you dig.***

benarcade

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 99
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #19 on: February 28, 2013, 08:07:11 pm »
What would I need to hook this up to a Mini-Pac?

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #20 on: February 28, 2013, 11:06:57 pm »
Theoretically a harness

The wiring instructions for the Mini-Pac are on Ultimarc's website. There is additional information about the trackball's wires HERE.

All you have to do is match em up.....

   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #21 on: March 08, 2013, 01:05:24 am »
Still have some...... :)
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

mlabrie

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Anything is possible, given enough time and money.
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #22 on: March 08, 2013, 01:51:06 am »
I would like one of these.  I can't PM yet.  Can you contact me?

My zip for shipping is 92692.

Thanks.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #23 on: March 08, 2013, 11:56:42 am »
PM sent
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16912
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #24 on: March 09, 2013, 12:10:52 am »
Do you have any 2 1/4 ones? That's what my Centipede uses. Damn.
***Build what you dig, bro. Build what you dig.***

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #25 on: March 09, 2013, 01:25:09 am »
Sure dont man.....wish I did....
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16912
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #26 on: March 09, 2013, 01:31:58 am »
Bummer, bro. For some reason I thought Centipede used a 3" ball.
***Build what you dig, bro. Build what you dig.***

chemikalguy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 34
  • Just Getting Started!
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #27 on: March 13, 2013, 10:39:30 am »
Do you still have any of these left?

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #28 on: March 13, 2013, 10:50:58 am »
Yes sure do...
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

mlabrie

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Anything is possible, given enough time and money.
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #29 on: March 16, 2013, 07:31:54 pm »
I bought one of these and I am very pleased.  It looks brand new. 

I am new to the arcade building hobby and he was sure to make sure I knew what I was buying and that I needed another piece to make it work.  I appreciated that he was clear on what I was getting and helpful in pointing out some different interface options.

I would definitely buy something from him again.

Thanks.
« Last Edit: March 16, 2013, 10:53:10 pm by mlabrie »

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16912
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #30 on: March 16, 2013, 07:40:15 pm »
Bump for a good seller. He's hooking me up with some parts, and we even went through this song and dance...  :cheers:

***Build what you dig, bro. Build what you dig.***

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #31 on: March 17, 2013, 10:01:11 pm »
Folks,

I have 1 green board trackball, 30.00 + shipping...

It's one of the older boards, but works all the same.....
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

darkSSide

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 165
  • I want to make my own money!
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #32 on: April 12, 2013, 06:34:45 pm »
Interested In 1 If Still Available. Just Bought An Old  Slikstik Classic Control Board Without A Track Ball.
Sending A PM

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #33 on: April 12, 2013, 07:40:52 pm »
Yes still have some available...
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

abcmanusn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • I want to build my own arcade controls!
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #34 on: April 12, 2013, 11:32:58 pm »
Pm sent



sdweim85

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 98
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #35 on: April 15, 2013, 01:09:13 pm »
Just wanted to weigh in, I bought a trackball off  Rablack about a month ago.  Finally finished my CP and I love the trackball.  Works great, I'm glad I bought one off him.  Fair price, quick shipping, with quick and politie responses to my Noob questions :)

good stuff  :cheers:

happyfunball

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 162
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #36 on: April 15, 2013, 01:45:04 pm »
you may not be able to answer this, but I just ordered an ArcadeSD board, which has a jamma interface and only supports the newer suzo/happ trackballs.
is this one of those?

http://na.suzohapp.com/trackballs/560100xx.htm

if so I'd be down with buying one or two  them if there are any left.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #37 on: April 15, 2013, 02:46:43 pm »
you may not be able to answer this, but I just ordered an ArcadeSD board, which has a jamma interface and only supports the newer suzo/happ trackballs.
is this one of those?

http://na.suzohapp.com/trackballs/560100xx.htm

if so I'd be down with buying one or two  them if there are any left.

Hello,

From what I understand, Happs has 2 versions of the encoder boards, red and green.  The green board was v1, read board v2.

All of what I have are the red boards, so they will work with your setup.

Yes I have enough to cover what you need...

PM me details when eready..


   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16912
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #38 on: April 15, 2013, 03:06:37 pm »
you may not be able to answer this, but I just ordered an ArcadeSD board, which has a jamma interface and only supports the newer suzo/happ trackballs.
is this one of those?

http://na.suzohapp.com/trackballs/560100xx.htm

if so I'd be down with buying one or two  them if there are any left.

Hello,

From what I understand, Happs has 2 versions of the encoder boards, red and green.  The green board was v1, read board v2.

All of what I have are the red boards, so they will work with your setup.

Yes I have enough to cover what you need...

PM me details when eready..

I can vouch for rablack's red boards. I swapped some green ones out for red ones he sold me, and everything worked just fine.
***Build what you dig, bro. Build what you dig.***

happyfunball

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 162
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #39 on: April 15, 2013, 03:25:31 pm »
you may not be able to answer this, but I just ordered an ArcadeSD board, which has a jamma interface and only supports the newer suzo/happ trackballs.
is this one of those?

http://na.suzohapp.com/trackballs/560100xx.htm

if so I'd be down with buying one or two  them if there are any left.

Hello,

From what I understand, Happs has 2 versions of the encoder boards, red and green.  The green board was v1, read board v2.

All of what I have are the red boards, so they will work with your setup.

Yes I have enough to cover what you need...

PM me details when eready..
PM sent

darkSSide

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 165
  • I want to make my own money!
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #40 on: April 16, 2013, 11:48:16 am »
Payment Sent!

abcmanusn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • I want to build my own arcade controls!
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #41 on: April 19, 2013, 02:25:00 pm »
Just want to say a big thank you. I just received my trackball today and it looks super clean and is in excellent condition.
I really appreciate the included wiring harness. It will make the connection to the mini PAC so much easier.


happyfunball

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 162
Re: Happs 3" Trackballs Refurbished - $35.00 + Shipping per trackball
« Reply #42 on: April 20, 2013, 02:13:06 pm »
my two trackballs arrived today. very well packaged, look clean and the ball motion is really smooth.
can't test them for a couple weeks probably but I assume they will work fine.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Worked a deal with my vendor, so I'll have a few HAPPS OEM CLEAR T-BALLS on hand.





   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

Brian74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1066
  • Yep... I built that!!
How much for the clear trackball by itself?
         

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
60 premium
25 generic

Sent from my PC36100 using Tapatalk 2

   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

darkSSide

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 165
  • I want to make my own money!
Got mine the other day! Looks brand new! Haven't tested but I'm sure it's good. Now to get that interface......
By the way do you have a pic of the two TB's together to see the difference?

Sent from my DROID RAZR using Tapatalk 2


PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6438
  • 2013 UCA Awardee
Post removed due to my reading comprehension fail.


Scott
« Last Edit: April 23, 2013, 11:09:34 am by PL1 »

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
They look identical.....

Visually you can't tell them apart..I have an OEM in my rig.

The OEM is slightly heavier and is suppose to be less scratch resistant, although i do have scratches on mine.

So it's a preference, if you want cool eye candy, and not too picky, go with the generic.  They both play the same.
« Last Edit: April 23, 2013, 01:13:45 pm by rablack97 »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6438
  • 2013 UCA Awardee
Post removed due to my reading comprehension fail.


Scott
« Last Edit: April 23, 2013, 11:10:02 am by PL1 »

Fallen_Veteran

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 45
  • I want to build my own arcade controls!
Do you have any pics of the refurbed with the clear tball and RGBs installed and working

keilmillerjr

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1290
  • Web Developer.
I received my trackball yesterday. Shipping was damn fast. Trackball looks like a brand new unit. Packaged very well. He even included a harness that plugs in with leads to connect to an encoder!

Thank you.

thrasherx

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 83
  • I want to build my own arcade controls!
Any idea how much the PS/2 and USB adapter would cost?  I think I can buy an opti-wiz for $15-20.  Still, in my book, $60 for a used trackball is way better than $80 for a new trackball.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Any idea how much the PS/2 and USB adapter would cost?  I think I can buy an opti-wiz for $15-20.  Still, in my book, $60 for a used trackball is way better than $80 for a new trackball.

Looking at the $12-15 range, also keep in mind this is in no way intended to compete with Randy and Andy's more superior interfaces. 

These are just simple interfaces that are plug and play so you dont have to butcher a mouse.  They are for trackballs only that dont have all the bells and whistles (z-axis, dual t-ball/spinner interface.

I got a working protype, with a few bugs i need to fish out, I will post some preliminary photos of v1. tonight.

These were built to simplify getting a raw trackball up and running.....

I'll be offering these seperately, but mainly with the refurbs i sell, to give my customers more flexibility on their installs.

   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

darkSSide

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 165
  • I want to make my own money!
NICE! Can't wait. That is exactly what I am looking for. All need it for is to control one TB for games and a mouse.

Sent from my DROID RAZR


Brian74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1066
  • Yep... I built that!!
Well this clear trackball would match better to my clear buttons. Is it 25 shipped?
         

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
I wish, ball is light though....

I send out full T-balls for about 9-10 for shipping.

So shouldnt be more than 35 tops....PM me your zip and i'll find out...



   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Ok I got a OEM and generic t-ball, you tell me which is which   >:D

I actually had it backwards the generic is a tad bit heavier but in testing rolled about the same....

« Last Edit: April 29, 2013, 07:04:41 pm by rablack97 »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

Brian74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1066
  • Yep... I built that!!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - Clear T-Ball Comparison
« Reply #58 on: April 29, 2013, 09:11:03 pm »
oem on right
         

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - Clear T-Ball Comparison
« Reply #59 on: April 29, 2013, 09:15:22 pm »
 :dunno :duckhunt
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
New batch of t-balls are in ready to go....
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

Le Chuck

  • I want a new quote!
  • Wiki Contributor
  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5358
  • Yots is an Arrogant Tallywacker
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #61 on: May 13, 2013, 04:42:29 pm »
Your balls are nice and shiny!

Just wanted to drop a note that seller ships quick and had a great product.

darkSSide

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 165
  • I want to make my own money!
Re: Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #62 on: May 13, 2013, 05:13:19 pm »
Your balls are nice and shiny!

Just wanted to drop a note that seller ships quick and had a great product.
Hmmm.....
But I do second my man here has top notch products and ships swiftly!

Sent from my Atari 2600


happyfunball

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 162
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #63 on: May 14, 2013, 10:21:58 am »
I'll add I was finally able to test and use the two I purchased this weekend and they work great.

darkSSide

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 165
  • I want to make my own money!

camconcay

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • I want to build my own arcade controls!
New batch of t-balls are in ready to go....

Can't PM but interested if you still have any track balls for sale please let me know how to pay etc thanks!

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #66 on: June 13, 2013, 04:27:35 pm »
Paypal to tnb52001@hotmail.com....make sure you accept any fees to ensure I get full payment...

Sent from my PC36100 using Tapatalk 2

   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

camconcay

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #67 on: June 20, 2013, 10:08:22 am »
Received the package, fantastic service much appreciated!!!

thrasherx

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 83
  • I want to build my own arcade controls!
Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #68 on: June 22, 2013, 01:17:53 pm »
Received the package, fantastic service much appreciated!!!
+1! Excellent service!

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #69 on: August 15, 2013, 12:44:07 pm »
Sales bump
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

wglong

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #70 on: August 15, 2013, 11:53:36 pm »
There's several updates here. What do you have available and how much? USB or PS/2 interface?

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2773
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #71 on: August 16, 2013, 12:14:11 am »
Annnnnnnnnd, subscribed!

DGP

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 209
  • Gamer4Life
    • My Toys...
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #72 on: August 16, 2013, 02:36:14 am »
Possibly interested but would require USB interface, is this available?

Thank you,
Jason
Multi-Cade x2 (full size and bar top)

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #73 on: August 16, 2013, 09:43:39 am »
Possibly interested but would require USB interface, is this available?

Thank you,
Jason

Yes, the interface is USB and PS2, you would get an adaptor for both applications....See review below...

http://forum.arcadecontrols.com/index.php/topic,132438.0.html

Annnnnnnnnd, subscribed!

Sweettt :cheers:

There's several updates here. What do you have available and how much? USB or PS/2 interface?

I have refurbished T-Balls
Clear T-balls
Custom RGB Led Mod
USB/PS2 interface
T-Ball Mounts

Most folks do a package deal so the price varies depending on what they want....PM me for a quote

I do try to keep the price below retail or theres really no point in selling refurbs.

Everyone has been happy so far no complaints,

I have one Standard T-Ball w/ USB/PS2 Interface ready to go $60.00 shipped.

If anyone just wants a T-Ball I have those ready as well, I am waiting on more parts for the interface and led mods....
« Last Edit: August 16, 2013, 09:48:09 am by rablack97 »
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

Tonynlo

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #74 on: September 19, 2013, 10:33:25 am »
Ordered a T-BALL with USB encoder.  Received it in under 1 week.  Very happy.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #75 on: October 06, 2013, 12:45:34 pm »
bump......Just got a new shipment in...
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16912
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #76 on: October 06, 2013, 12:46:40 pm »
What about the encoders? Any progress?
***Build what you dig, bro. Build what you dig.***

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S.
« Reply #77 on: October 06, 2013, 12:50:28 pm »
Yeah bud, I pm'd you awhile back letting you know i got all parts in for a new batch....

PM me and let me know what you need....
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

Meridian99

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #78 on: November 05, 2013, 08:14:11 pm »
Are these t-balls still available?

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #79 on: November 06, 2013, 04:02:16 pm »
yep
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

rdhanded2

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #80 on: December 10, 2013, 10:47:58 am »
I wanted to grab one of these from you if you still have them but I am unable to PM you.  Shoot me a message and I will get payment sent out.  Thanks!!

shayvidas

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 117
  • mame Fan Forever !!!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #81 on: January 05, 2014, 12:56:49 am »
Hello All,

I have some refurbished Happs 3" trackballs and accessory parts for sale. 

All trackballs were pulled apart, washed, bearings re-oiled by vaccuum pressure, trackballs scrubbed back to a nice white.

All tested and working...

PM me for package quotes if interested...



TBall PS2/USB Encoders - Works with Spinners Too!



Clear Trackball Replacements



Clear T-Ball Led Mods



T-Ball 3" mounting plates - Brand New



Refurbished White T-Ball Replacements




i sent you a PM, i really need one !!!
thank you !!!!!!

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #82 on: January 05, 2014, 04:47:12 pm »
PM sent..
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

FNwoz

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #83 on: January 08, 2014, 09:30:07 pm »
I am interested in the T-ball as well as the USB/PS2 interface. Please send me a message and we can get connected up.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #84 on: January 08, 2014, 10:17:36 pm »
Sure thing
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

sdrob04

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #85 on: January 30, 2014, 11:55:58 pm »
Great communication, great products.  Very happy with the condition of the trackball units and related accessories.

STANirvanaIND

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #86 on: February 14, 2014, 02:27:53 pm »
Hi rablack97,

Really interested in one of these Trackballs and USB/PS2 interface (and maybe a faceplate).  Please send me a PM so we can figure something out.  Thanks.

Mr_Numbers

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 173
  • Long time lurker, first time builder
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #87 on: February 16, 2014, 04:08:25 pm »
Hi,

I'm interested in a trackball and perhaps upgrade to clear ball, led ect.  Can I receive a PM to flesh out the details?


Thanks!

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #88 on: February 17, 2014, 12:29:19 am »
PM sent
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

JimmyU

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 398
  • I believe I can fly!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #89 on: February 17, 2014, 11:12:06 pm »
I would be interested in a trackball/encoder combo. Please PM me. Thanks. :)

Brutick

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 34
  • Working on my project!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #90 on: February 19, 2014, 04:58:49 pm »
Hey,

I'm interested in a 3" clear ball replacement for my current Happ Trackball as well as an RGB LED kit. Can you please PM me with pricing details?

Thanks,
Brutick

southpaw13

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 828
  • Whatever!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #91 on: April 01, 2014, 12:28:16 pm »
Hello, I blew up my LED's to my trackball setup (my own fault) and rablack97 sold me the parts I needed to fix it at a good price and shipped super fast.  Great seller!

Thanks!

MrExtrm

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #92 on: May 02, 2014, 11:22:28 am »
If any are still available, I'm interested

New to the forum, and can't seem to figure out how to PM you...  :censored:

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6438
  • 2013 UCA Awardee
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #93 on: May 02, 2014, 02:21:07 pm »
If any are still available, I'm interested

New to the forum, and can't seem to figure out how to PM you...  :censored:
Welcome aboard, MrExtrm.

Post 4 or 5 more times and your PMs will be automatically turned on.   :cheers:

You can also e-mail Rodney (rablack97) using the icon under his avatar.


Scott
« Last Edit: May 02, 2014, 02:23:11 pm by PL1 »

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #94 on: May 02, 2014, 11:27:38 pm »
Yep I still have some available.

Shoot me an email tnb52001@hotmail.com

Thanks Scott  :cheers:
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

MrExtrm

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #95 on: May 03, 2014, 02:39:55 pm »
Thanks guys...

email sent

Fastrucken

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #96 on: May 05, 2014, 08:02:11 pm »
Email sent

neoweapon

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #97 on: May 12, 2014, 06:24:31 pm »
Sent an email for package quote. THanks!

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #98 on: May 12, 2014, 07:01:01 pm »
Quote sent.
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16912
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #99 on: May 12, 2014, 11:15:47 pm »
Posts read.
***Build what you dig, bro. Build what you dig.***

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2773
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #100 on: May 14, 2014, 03:50:36 pm »
Humour detected.

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #101 on: May 15, 2014, 10:50:40 pm »
Yot gets bored and has to randomly irritate folks.....it is rather amusing, gotta love him for it.
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16912
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #102 on: May 16, 2014, 12:53:55 am »
Yot gets bored and has to randomly irritate folks.....it is rather amusing, gotta love him for it.

Irritation noted.  :cheers:
***Build what you dig, bro. Build what you dig.***

Rick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2773
  • Bartop, Cocktail and Pinball Arcade Cabinets
    • Gameroom Designs Canada
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #103 on: May 16, 2014, 08:10:52 am »
Irritation noted.  cheers:

Note quoted!

Brian74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1066
  • Yep... I built that!!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #104 on: June 17, 2014, 02:15:19 pm »
 rablack, looking for a clear trackball and encoder if you still have them?
         

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #105 on: June 17, 2014, 04:44:49 pm »
yes sir......pm me and I'll get you taken care of man. :)
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

horizon

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 202
  • They've gone plaid!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #106 on: August 05, 2014, 04:44:26 pm »
Had a really great experience with rablack for my trackball solution.  He ended up misquoting the final total, honored what he did quote, and got it shipped out quickly.  The packaging he used was solid, and the track ball rolls smooth as sin. 

Will highly recommend to anyone looking for one.

sin360

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 44
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #107 on: November 20, 2014, 06:42:43 pm »
Are these still available? How much is with the encoder and mounting plate?

Thanks

bchiarmonte

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #108 on: January 13, 2015, 10:38:59 pm »
I am planning a pedestal build right now. I already have a trackball to use but I may look into getting an encoder, mounting plate and a clear ball. Do you normally have the stuff in stock?

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #109 on: January 13, 2015, 10:40:32 pm »
I have all of what you need... :cheers:
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

JimmyU

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 398
  • I believe I can fly!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #110 on: January 18, 2015, 12:52:33 pm »
I bought a trackball from you last year. How much for a generic clear ball and LED mod?

straight6tt

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #111 on: February 23, 2015, 10:36:06 pm »
Are these highlip or high ball?

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #112 on: February 23, 2015, 10:37:46 pm »
nope just standard.
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

mattfl

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 44
  • I want my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #113 on: February 05, 2016, 07:07:57 am »
I know this thread is about a year old but I don't suppose you still have these?

rablack97

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2116
  • If you don't try, you have no chance at innovation
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #114 on: February 05, 2016, 09:23:06 am »
I know this thread is about a year old but I don't suppose you still have these?

Yep i still have a couple what did you need?
   

2016 Texas Pinball Festival - Best Arcade In Show - MKX

mattfl

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 44
  • I want my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #115 on: February 05, 2016, 09:29:33 am »
I know this thread is about a year old but I don't suppose you still have these?

Yep i still have a couple what did you need?

PM incoming!

Brian74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1066
  • Yep... I built that!!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #116 on: March 31, 2016, 07:19:53 pm »
Do you still have 2 left?
         

steved61

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #117 on: April 15, 2016, 12:28:39 pm »
If these are still available I'd like a trackball and the encoder board.
Steved

steved61

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • I want to build my own arcade controls!
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #118 on: March 05, 2017, 10:47:20 am »
By change do you have any 2 1/4 inch Happs trackballs ?

gumby510

  • Trade Count: (0)
  • Full Member
  • ***
  • Online Online
  • Posts: 96
  • SR-20 NX 2000
Re: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories**
« Reply #119 on: September 29, 2017, 11:57:28 pm »
 Have any of these left?


Sent from my iPhone using Tapatalk

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31