Author Topic: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - Added Accessories (Read 54291 times)

rablack97 · « **on:** January 24, 2013, 08:10:31 pm »

Hello All,

I have some refurbished Happs 3" trackballs and accessory parts for sale.

All trackballs were pulled apart, washed, bearings re-oiled by vaccuum pressure, trackballs scrubbed back to a nice white.

All tested and working...

PM me for package quotes if interested...

TBall PS2/USB Encoders - Works with Spinners Too!

Clear Trackball Replacements

Clear T-Ball Led Mods

T-Ball 3" mounting plates - Brand New

Refurbished White T-Ball Replacements

brained · « **Reply #1 on:** January 24, 2013, 11:24:12 pm »

Sorry to hijack your thread, but how did you manage to get the whiteness from the trackballs again?. I just happened to ask that question a couple of hours ago. Again, sorry for the hijack.

rablack97 · « **Reply #2 on:** January 25, 2013, 08:30:19 am »

Soap and water and a towel, they werent super filthy.....

Also try a bleach solution or take some comet and put it in water make slurry and clean it with that.....

Maybe use that tub and tile cleaner.....i think its called bleach white....The trackballs are durable so basically anything with a little bleach should do the trick....

brained · « **Reply #3 on:** January 25, 2013, 08:54:23 am »

Thanks a lot, I'll give it a try

rablack97 · « **Reply #4 on:** February 05, 2013, 11:11:14 pm »

still have a few left.....bump.....

Also, if interested I can mod these with a clear trackball with rgb leds....

rablack97 · « **Reply #5 on:** February 14, 2013, 12:29:27 pm »

BUMPITY BUMP

nipsmg · « **Reply #6 on:** February 14, 2013, 02:40:41 pm »

Just want to say I got mine, and it's in great condition and works awesome (way better than my beat up one)! If you're thinking about getting a trackball at all, get one of these that are like-new and save like $50.

chopperthedog · « **Reply #7 on:** February 14, 2013, 06:27:17 pm »

* chopperthedog echos above statement. But ordered for a back up or future project.

good day.

rablack97 · « **Reply #8 on:** February 25, 2013, 10:28:04 pm »

Getting more of these tomorrow....

I'm also working on a simple ps/2 usb interface board as an attachment to the harness, so you can attach these to a PC. PS/2 is tested and working, just waiting on parts for the USB....

Will update as i test further.....

fudgeyall · « **Reply #9 on:** February 28, 2013, 02:48:31 pm »

Quote from: rablack97 on February 25, 2013, 10:28:04 pm

Getting more of these tomorrow....

I'm also working on a simple ps/2 usb interface board as an attachment to the harness, so you can attach these to a PC. PS/2 is tested and working, just waiting on parts for the USB....

Will update as i test further.....

When you get the USB interface working how much are you going to charge?

Le Chuck · « **Reply #10 on:** February 28, 2013, 02:51:58 pm »

I'm down for a PS2 - price still $35?

rablack97 · « **Reply #11 on:** February 28, 2013, 03:00:36 pm »

Not sure yet, I'd like to test the setup first before tossing out prices. I hope to have a dual interface for both USB and PS/2 all combined including the 3 buttons. I assure you it will be well below what the mainstream USB PS/2 adaptor boards go for on the Happs trackballs.

Once i get a working prototype, i'll probably sell the interface seperately as well.....

Still waiting on parts, will update the thread as I get more information..

Also looking at clear trackball mods with rgb led lighting.

rablack97 · « **Reply #12 on:** February 28, 2013, 03:01:54 pm »

Sending you a PM Chuck

yotsuya · « **Reply #13 on:** February 28, 2013, 03:07:04 pm »

I might be interested in one of these, but I don't need PS/2-USB, as long as it has the red interface card.

Le Chuck · « **Reply #14 on:** February 28, 2013, 03:09:01 pm »

Quote from: rablack97 on February 28, 2013, 03:00:36 pm

Also looking at clear trackball mods with rgb led lighting.

And I'm hooked. Once you get it tested out I'm down for one for sure, maybe two.

rablack97 · « **Reply #15 on:** February 28, 2013, 03:17:11 pm »

Quote from: yotsuya on February 28, 2013, 03:07:04 pm

I might be interested in one of these, but I don't need PS/2-USB, as long as it has the red interface card.

LOL, thats all i have is red....

I have one lowly green one, in timeout all alone...

Oh yeah, also for a few bucks more I can also send out a set of new bearings.....

So basically, your doubling the life of the thing....

yotsuya · « **Reply #16 on:** February 28, 2013, 03:53:45 pm »

Cool. Put one aside for me. I'll let you know on Monday or so (I'm getting a Centipede control panel and if it needs a new TB, which I think it does, I'll be getting one from you).

So what's the NFC East Homeboy Discount?

rablack97 · « **Reply #17 on:** February 28, 2013, 06:33:58 pm »

$35.00 Cowboy blue....

yotsuya · « **Reply #18 on:** February 28, 2013, 06:50:59 pm »

Take a dollar off for every playoff game Tony Romo has won. Oh wait, that's only like a buck.

benarcade · « **Reply #19 on:** February 28, 2013, 08:07:11 pm »

What would I need to hook this up to a Mini-Pac?

rablack97 · « **Reply #20 on:** February 28, 2013, 11:06:57 pm »

Theoretically a harness

The wiring instructions for the Mini-Pac are on Ultimarc's website. There is additional information about the trackball's wires HERE.

All you have to do is match em up.....

rablack97 · « **Reply #21 on:** March 08, 2013, 01:05:24 am »

Still have some......

mlabrie · « **Reply #22 on:** March 08, 2013, 01:51:06 am »

I would like one of these. I can't PM yet. Can you contact me?

My zip for shipping is 92692.

Thanks.

rablack97 · « **Reply #23 on:** March 08, 2013, 11:56:42 am »

PM sent

yotsuya · « **Reply #24 on:** March 09, 2013, 12:10:52 am »

Do you have any 2 1/4 ones? That's what my Centipede uses. Damn.

rablack97 · « **Reply #25 on:** March 09, 2013, 01:25:09 am »

Sure dont man.....wish I did....

yotsuya · « **Reply #26 on:** March 09, 2013, 01:31:58 am »

Bummer, bro. For some reason I thought Centipede used a 3" ball.

chemikalguy · « **Reply #27 on:** March 13, 2013, 10:39:30 am »

Do you still have any of these left?

rablack97 · « **Reply #28 on:** March 13, 2013, 10:50:58 am »

Yes sure do...

mlabrie · « **Reply #29 on:** March 16, 2013, 07:31:54 pm »

I bought one of these and I am very pleased. It looks brand new.

I am new to the arcade building hobby and he was sure to make sure I knew what I was buying and that I needed another piece to make it work. I appreciated that he was clear on what I was getting and helpful in pointing out some different interface options.

I would definitely buy something from him again.

Thanks.

yotsuya · « **Reply #30 on:** March 16, 2013, 07:40:15 pm »

Bump for a good seller. He's hooking me up with some parts, and we even went through this song and dance...

rablack97 · « **Reply #31 on:** March 17, 2013, 10:01:11 pm »

Folks,

I have 1 green board trackball, 30.00 + shipping...

It's one of the older boards, but works all the same.....

darkSSide · « **Reply #32 on:** April 12, 2013, 06:34:45 pm »

Interested In 1 If Still Available. Just Bought An Old Slikstik Classic Control Board Without A Track Ball.
Sending A PM

rablack97 · « **Reply #33 on:** April 12, 2013, 07:40:52 pm »

Yes still have some available...

abcmanusn · « **Reply #34 on:** April 12, 2013, 11:32:58 pm »

Pm sent

sdweim85 · « **Reply #35 on:** April 15, 2013, 01:09:13 pm »

Just wanted to weigh in, I bought a trackball off Rablack about a month ago. Finally finished my CP and I love the trackball. Works great, I'm glad I bought one off him. Fair price, quick shipping, with quick and politie responses to my Noob questions

good stuff

happyfunball · « **Reply #36 on:** April 15, 2013, 01:45:04 pm »

you may not be able to answer this, but I just ordered an ArcadeSD board, which has a jamma interface and only supports the newer suzo/happ trackballs.
is this one of those?

http://na.suzohapp.com/trackballs/560100xx.htm

if so I'd be down with buying one or two them if there are any left.

rablack97 · « **Reply #37 on:** April 15, 2013, 02:46:43 pm »

Quote from: happyfunball on April 15, 2013, 01:45:04 pm

you may not be able to answer this, but I just ordered an ArcadeSD board, which has a jamma interface and only supports the newer suzo/happ trackballs.
is this one of those?

http://na.suzohapp.com/trackballs/560100xx.htm

if so I'd be down with buying one or two them if there are any left.

Hello,

From what I understand, Happs has 2 versions of the encoder boards, red and green. The green board was v1, read board v2.

All of what I have are the red boards, so they will work with your setup.

Yes I have enough to cover what you need...

PM me details when eready..

yotsuya · « **Reply #38 on:** April 15, 2013, 03:06:37 pm »

Quote from: rablack97 on April 15, 2013, 02:46:43 pm

Quote from: happyfunball on April 15, 2013, 01:45:04 pm
you may not be able to answer this, but I just ordered an ArcadeSD board, which has a jamma interface and only supports the newer suzo/happ trackballs.
is this one of those?

http://na.suzohapp.com/trackballs/560100xx.htm

if so I'd be down with buying one or two them if there are any left.

Hello,

From what I understand, Happs has 2 versions of the encoder boards, red and green. The green board was v1, read board v2.

All of what I have are the red boards, so they will work with your setup.

Yes I have enough to cover what you need...

PM me details when eready..

I can vouch for rablack's red boards. I swapped some green ones out for red ones he sold me, and everything worked just fine.

happyfunball · « **Reply #39 on:** April 15, 2013, 03:25:31 pm »

Quote from: rablack97 on April 15, 2013, 02:46:43 pm

Quote from: happyfunball on April 15, 2013, 01:45:04 pm
you may not be able to answer this, but I just ordered an ArcadeSD board, which has a jamma interface and only supports the newer suzo/happ trackballs.
is this one of those?

http://na.suzohapp.com/trackballs/560100xx.htm

if so I'd be down with buying one or two them if there are any left.

Hello,

From what I understand, Happs has 2 versions of the encoder boards, red and green. The green board was v1, read board v2.

All of what I have are the red boards, so they will work with your setup.

Yes I have enough to cover what you need...

PM me details when eready..

PM sent

darkSSide · « **Reply #40 on:** April 16, 2013, 11:48:16 am »

Payment Sent!

abcmanusn · « **Reply #41 on:** April 19, 2013, 02:25:00 pm »

Just want to say a big thank you. I just received my trackball today and it looks super clean and is in excellent condition.
I really appreciate the included wiring harness. It will make the connection to the mini PAC so much easier.

happyfunball · « **Reply #42 on:** April 20, 2013, 02:13:06 pm »

my two trackballs arrived today. very well packaged, look clean and the ball motion is really smooth.
can't test them for a couple weeks probably but I assume they will work fine.

rablack97 · « **Reply #43 on:** April 22, 2013, 11:18:49 am »

Worked a deal with my vendor, so I'll have a few HAPPS OEM CLEAR T-BALLS on hand.

Brian74 · « **Reply #44 on:** April 22, 2013, 06:04:40 pm »

How much for the clear trackball by itself?

rablack97 · « **Reply #45 on:** April 22, 2013, 07:43:28 pm »

60 premium
25 generic

Sent from my PC36100 using Tapatalk 2

darkSSide · « **Reply #46 on:** April 22, 2013, 08:06:29 pm »

Got mine the other day! Looks brand new! Haven't tested but I'm sure it's good. Now to get that interface......
By the way do you have a pic of the two TB's together to see the difference?

Sent from my DROID RAZR using Tapatalk 2

PL1 · « **Reply #47 on:** April 22, 2013, 08:30:48 pm »

Post removed due to my reading comprehension fail.

Scott

rablack97 · « **Reply #48 on:** April 22, 2013, 09:48:17 pm »

They look identical.....

Visually you can't tell them apart..I have an OEM in my rig.

The OEM is slightly heavier and is suppose to be less scratch resistant, although i do have scratches on mine.

So it's a preference, if you want cool eye candy, and not too picky, go with the generic. They both play the same.

PL1 · « **Reply #49 on:** April 22, 2013, 10:57:29 pm »

Post removed due to my reading comprehension fail.

Scott

Fallen_Veteran · « **Reply #50 on:** April 22, 2013, 11:41:22 pm »

Do you have any pics of the refurbed with the clear tball and RGBs installed and working

keilmillerjr · « **Reply #51 on:** April 23, 2013, 04:06:42 am »

I received my trackball yesterday. Shipping was damn fast. Trackball looks like a brand new unit. Packaged very well. He even included a harness that plugs in with leads to connect to an encoder!

Thank you.

thrasherx · « **Reply #52 on:** April 23, 2013, 12:41:53 pm »

Any idea how much the PS/2 and USB adapter would cost? I think I can buy an opti-wiz for $15-20. Still, in my book, $60 for a used trackball is way better than $80 for a new trackball.

rablack97 · « **Reply #53 on:** April 23, 2013, 01:35:50 pm »

Quote from: thrasherx on April 23, 2013, 12:41:53 pm

Any idea how much the PS/2 and USB adapter would cost? I think I can buy an opti-wiz for $15-20. Still, in my book, $60 for a used trackball is way better than $80 for a new trackball.

Looking at the $12-15 range, also keep in mind this is in no way intended to compete with Randy and Andy's more superior interfaces.

These are just simple interfaces that are plug and play so you dont have to butcher a mouse. They are for trackballs only that dont have all the bells and whistles (z-axis, dual t-ball/spinner interface.

I got a working protype, with a few bugs i need to fish out, I will post some preliminary photos of v1. tonight.

These were built to simplify getting a raw trackball up and running.....

I'll be offering these seperately, but mainly with the refurbs i sell, to give my customers more flexibility on their installs.

darkSSide · « **Reply #54 on:** April 23, 2013, 02:27:11 pm »

NICE! Can't wait. That is exactly what I am looking for. All need it for is to control one TB for games and a mouse.

Sent from my DROID RAZR

Brian74 · « **Reply #55 on:** April 24, 2013, 03:45:44 pm »

Well this clear trackball would match better to my clear buttons. Is it 25 shipped?

rablack97 · « **Reply #56 on:** April 24, 2013, 04:29:17 pm »

I wish, ball is light though....

I send out full T-balls for about 9-10 for shipping.

So shouldnt be more than 35 tops....PM me your zip and i'll find out...

rablack97 · « **Reply #57 on:** April 29, 2013, 07:02:18 pm »

Ok I got a OEM and generic t-ball, you tell me which is which

I actually had it backwards the generic is a tad bit heavier but in testing rolled about the same....

Brian74 · « **Reply #58 on:** April 29, 2013, 09:11:03 pm »

oem on right

rablack97 · « **Reply #59 on:** April 29, 2013, 09:15:22 pm »

rablack97 · « **Reply #60 on:** May 07, 2013, 08:48:54 am »

New batch of t-balls are in ready to go....

Le Chuck · « **Reply #61 on:** May 13, 2013, 04:42:29 pm »

Your balls are nice and shiny!

Just wanted to drop a note that seller ships quick and had a great product.

darkSSide · « **Reply #62 on:** May 13, 2013, 05:13:19 pm »

Quote from: Le Chuck on May 13, 2013, 04:42:29 pm

Your balls are nice and shiny!

Just wanted to drop a note that seller ships quick and had a great product.

Hmmm.....
But I do second my man here has top notch products and ships swiftly!

Sent from my Atari 2600

happyfunball · « **Reply #63 on:** May 14, 2013, 10:21:58 am »

I'll add I was finally able to test and use the two I purchased this weekend and they work great.

darkSSide · « **Reply #64 on:** May 20, 2013, 01:13:51 am »

Check out my review on these T-balls
http://forum.arcadecontrols.com/index.php/topic,132438.msg1360593.html#msg1360593

camconcay · « **Reply #65 on:** June 13, 2013, 03:51:59 pm »

Quote from: rablack97 on May 07, 2013, 08:48:54 am

New batch of t-balls are in ready to go....

Can't PM but interested if you still have any track balls for sale please let me know how to pay etc thanks!

rablack97 · « **Reply #66 on:** June 13, 2013, 04:27:35 pm »

Paypal to tnb52001@hotmail.com....make sure you accept any fees to ensure I get full payment...

Sent from my PC36100 using Tapatalk 2

camconcay · « **Reply #67 on:** June 20, 2013, 10:08:22 am »

Received the package, fantastic service much appreciated!!!

thrasherx · « **Reply #68 on:** June 22, 2013, 01:17:53 pm »

Quote from: camconcay on June 20, 2013, 10:08:22 am

Received the package, fantastic service much appreciated!!!

+1! Excellent service!

rablack97 · « **Reply #69 on:** August 15, 2013, 12:44:07 pm »

Sales bump

wglong · « **Reply #70 on:** August 15, 2013, 11:53:36 pm »

There's several updates here. What do you have available and how much? USB or PS/2 interface?

Rick · « **Reply #71 on:** August 16, 2013, 12:14:11 am »

Annnnnnnnnd, subscribed!

DGP · « **Reply #72 on:** August 16, 2013, 02:36:14 am »

Possibly interested but would require USB interface, is this available?

Thank you,
Jason

rablack97 · « **Reply #73 on:** August 16, 2013, 09:43:39 am »

Quote from: DGP on August 16, 2013, 02:36:14 am

Possibly interested but would require USB interface, is this available?

Thank you,
Jason

Yes, the interface is USB and PS2, you would get an adaptor for both applications....See review below...

http://forum.arcadecontrols.com/index.php/topic,132438.0.html

Quote from: Rick on August 16, 2013, 12:14:11 am

Annnnnnnnnd, subscribed!

Sweettt

Quote from: wglong on August 15, 2013, 11:53:36 pm

There's several updates here. What do you have available and how much? USB or PS/2 interface?

I have refurbished T-Balls
Clear T-balls
Custom RGB Led Mod
USB/PS2 interface
T-Ball Mounts

Most folks do a package deal so the price varies depending on what they want....PM me for a quote

I do try to keep the price below retail or theres really no point in selling refurbs.

Everyone has been happy so far no complaints,

I have one Standard T-Ball w/ USB/PS2 Interface ready to go $60.00 shipped.

If anyone just wants a T-Ball I have those ready as well, I am waiting on more parts for the interface and led mods....

Tonynlo · « **Reply #74 on:** September 19, 2013, 10:33:25 am »

Ordered a T-BALL with USB encoder. Received it in under 1 week. Very happy.

rablack97 · « **Reply #75 on:** October 06, 2013, 12:45:34 pm »

bump......Just got a new shipment in...

yotsuya · « **Reply #76 on:** October 06, 2013, 12:46:40 pm »

What about the encoders? Any progress?

rablack97 · « **Reply #77 on:** October 06, 2013, 12:50:28 pm »

Yeah bud, I pm'd you awhile back letting you know i got all parts in for a new batch....

PM me and let me know what you need....

Meridian99 · « **Reply #78 on:** November 05, 2013, 08:14:11 pm »

Are these t-balls still available?

rablack97 · « **Reply #79 on:** November 06, 2013, 04:02:16 pm »

rdhanded2 · « **Reply #80 on:** December 10, 2013, 10:47:58 am »

I wanted to grab one of these from you if you still have them but I am unable to PM you. Shoot me a message and I will get payment sent out. Thanks!!

shayvidas · « **Reply #81 on:** January 05, 2014, 12:56:49 am »

Quote from: rablack97 on January 24, 2013, 08:10:31 pm

Hello All,

I have some refurbished Happs 3" trackballs and accessory parts for sale.

All trackballs were pulled apart, washed, bearings re-oiled by vaccuum pressure, trackballs scrubbed back to a nice white.

All tested and working...

PM me for package quotes if interested...

TBall PS2/USB Encoders - Works with Spinners Too!

Clear Trackball Replacements

Clear T-Ball Led Mods

T-Ball 3" mounting plates - Brand New

Refurbished White T-Ball Replacements

i sent you a PM, i really need one !!!
thank you !!!!!!

rablack97 · « **Reply #82 on:** January 05, 2014, 04:47:12 pm »

PM sent..

FNwoz · « **Reply #83 on:** January 08, 2014, 09:30:07 pm »

I am interested in the T-ball as well as the USB/PS2 interface. Please send me a message and we can get connected up.

rablack97 · « **Reply #84 on:** January 08, 2014, 10:17:36 pm »

Sure thing

sdrob04 · « **Reply #85 on:** January 30, 2014, 11:55:58 pm »

Great communication, great products. Very happy with the condition of the trackball units and related accessories.

STANirvanaIND · « **Reply #86 on:** February 14, 2014, 02:27:53 pm »

Hi rablack97,

Really interested in one of these Trackballs and USB/PS2 interface (and maybe a faceplate). Please send me a PM so we can figure something out. Thanks.

Mr_Numbers · « **Reply #87 on:** February 16, 2014, 04:08:25 pm »

Hi,

I'm interested in a trackball and perhaps upgrade to clear ball, led ect. Can I receive a PM to flesh out the details?

Thanks!

rablack97 · « **Reply #88 on:** February 17, 2014, 12:29:19 am »

PM sent

JimmyU · « **Reply #89 on:** February 17, 2014, 11:12:06 pm »

I would be interested in a trackball/encoder combo. Please PM me. Thanks.

Brutick · « **Reply #90 on:** February 19, 2014, 04:58:49 pm »

Hey,

I'm interested in a 3" clear ball replacement for my current Happ Trackball as well as an RGB LED kit. Can you please PM me with pricing details?

Thanks,
Brutick

southpaw13 · « **Reply #91 on:** April 01, 2014, 12:28:16 pm »

Hello, I blew up my LED's to my trackball setup (my own fault) and rablack97 sold me the parts I needed to fix it at a good price and shipped super fast. Great seller!

Thanks!

MrExtrm · « **Reply #92 on:** May 02, 2014, 11:22:28 am »

If any are still available, I'm interested

New to the forum, and can't seem to figure out how to PM you...

PL1 · « **Reply #93 on:** May 02, 2014, 02:21:07 pm »

Quote from: MrExtrm on May 02, 2014, 11:22:28 am

If any are still available, I'm interested

New to the forum, and can't seem to figure out how to PM you...

Welcome aboard, MrExtrm.

Post 4 or 5 more times and your PMs will be automatically turned on.

You can also e-mail Rodney (rablack97) using the

icon under his avatar.

Scott

rablack97 · « **Reply #94 on:** May 02, 2014, 11:27:38 pm »

Yep I still have some available.

Shoot me an email tnb52001@hotmail.com

Thanks Scott

MrExtrm · « **Reply #95 on:** May 03, 2014, 02:39:55 pm »

Thanks guys...

email sent

Fastrucken · « **Reply #96 on:** May 05, 2014, 08:02:11 pm »

Email sent

neoweapon · « **Reply #97 on:** May 12, 2014, 06:24:31 pm »

Sent an email for package quote. THanks!

rablack97 · « **Reply #98 on:** May 12, 2014, 07:01:01 pm »

Quote sent.

yotsuya · « **Reply #99 on:** May 12, 2014, 11:15:47 pm »

Posts read.

Rick · « **Reply #100 on:** May 14, 2014, 03:50:36 pm »

Humour detected.

rablack97 · « **Reply #101 on:** May 15, 2014, 10:50:40 pm »

Yot gets bored and has to randomly irritate folks.....it is rather amusing, gotta love him for it.

yotsuya · « **Reply #102 on:** May 16, 2014, 12:53:55 am »

Quote from: rablack97 on May 15, 2014, 10:50:40 pm

Yot gets bored and has to randomly irritate folks.....it is rather amusing, gotta love him for it.

Irritation noted.

Rick · « **Reply #103 on:** May 16, 2014, 08:10:52 am »

Quote from: yotsuya on May 16, 2014, 12:53:55 am

Irritation noted. cheers:

Note quoted!

Brian74 · « **Reply #104 on:** June 17, 2014, 02:15:19 pm »

rablack, looking for a clear trackball and encoder if you still have them?

rablack97 · « **Reply #105 on:** June 17, 2014, 04:44:49 pm »

yes sir......pm me and I'll get you taken care of man.

horizon · « **Reply #106 on:** August 05, 2014, 04:44:26 pm »

Had a really great experience with rablack for my trackball solution. He ended up misquoting the final total, honored what he did quote, and got it shipped out quickly. The packaging he used was solid, and the track ball rolls smooth as sin.

Will highly recommend to anyone looking for one.

sin360 · « **Reply #107 on:** November 20, 2014, 06:42:43 pm »

Are these still available? How much is with the encoder and mounting plate?

Thanks

bchiarmonte · « **Reply #108 on:** January 13, 2015, 10:38:59 pm »

I am planning a pedestal build right now. I already have a trackball to use but I may look into getting an encoder, mounting plate and a clear ball. Do you normally have the stuff in stock?

rablack97 · « **Reply #109 on:** January 13, 2015, 10:40:32 pm »

I have all of what you need...

JimmyU · « **Reply #110 on:** January 18, 2015, 12:52:33 pm »

I bought a trackball from you last year. How much for a generic clear ball and LED mod?

straight6tt · « **Reply #111 on:** February 23, 2015, 10:36:06 pm »

Are these highlip or high ball?

rablack97 · « **Reply #112 on:** February 23, 2015, 10:37:46 pm »

nope just standard.

mattfl · « **Reply #113 on:** February 05, 2016, 07:07:57 am »

I know this thread is about a year old but I don't suppose you still have these?

rablack97 · « **Reply #114 on:** February 05, 2016, 09:23:06 am »

Quote from: mattfl on February 05, 2016, 07:07:57 am

I know this thread is about a year old but I don't suppose you still have these?

Yep i still have a couple what did you need?

mattfl · « **Reply #115 on:** February 05, 2016, 09:29:33 am »

Quote from: rablack97 on February 05, 2016, 09:23:06 am

Quote from: mattfl on February 05, 2016, 07:07:57 am
I know this thread is about a year old but I don't suppose you still have these?

Yep i still have a couple what did you need?

PM incoming!

Brian74 · « **Reply #116 on:** March 31, 2016, 07:19:53 pm »

Do you still have 2 left?

steved61 · « **Reply #117 on:** April 15, 2016, 12:28:39 pm »

If these are still available I'd like a trackball and the encoder board.
Steved

steved61 · « **Reply #118 on:** March 05, 2017, 10:47:20 am »

By change do you have any 2 1/4 inch Happs trackballs ?

gumby510 · « **Reply #119 on:** September 29, 2017, 11:57:28 pm »

Have any of these left?

Sent from my iPhone using Tapatalk


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - **Added Accessories** (Read 54291 times)

Author Topic: Happs 3" T-Ball Refurb - $45.00 Shipped U.S. - Added Accessories (Read 54291 times)