Main > Main Forum
Did the removalists break my cabinet or was it me?
jammin0:
He mentioned earlier that he tried a 2nd PSU so I assume he's had a look at it.
lilshawn:
alrighty, fair enough
i'd swap the fan plugs around, take a chassis fan and plug it into the cpu header and power it up. (make sure the cpu fan is still powered.)
WindDrake:
You have the same motherboard that I do in my main rig. This board has a known weird fluke with the older bios.
Remove all the ram except 1 stick, it must be in Slot 1.
Power the PC up. It'll fire right up. Go into BIOS setup. Save and Exit.
Power off, install the rest of the ram. Then update your BIOS when you're back in Windows. :P
lilshawn:
--- Quote from: WindDrake on January 22, 2013, 08:44:36 pm ---This board has a known weird fluke with the older bios.
--- End quote ---
yeeek! I hope they updated it. :-\
WindDrake:
--- Quote from: lilshawn on January 22, 2013, 10:52:24 pm ---
--- Quote from: WindDrake on January 22, 2013, 08:44:36 pm ---This board has a known weird fluke with the older bios.
--- End quote ---
yeeek! I hope they updated it. :-\
--- End quote ---
Yep, it's fixed in the newer ones.