| Main > Main Forum |
| Bill Acceptor help needed |
| (1/2) > >> |
| zaaid1989:
Hello, Can someone give me a little introduction of how to use a bill acceptor? I have got a used bill acceptor. It's model is ICT P77. It has come with a couple of cables. I have downloaded the manuals from ICT website but I still don't get the function completely. Kindly tell me how can I use it? With some searching I have come to know that there's some software FP001 that I need to program it. But I still don't get the completely functionality. I will be very thankful if somebody can briefly tell me how to use it from A to Z. If you know some links to some tutorial etc please share them too. Thank you. |
| ed12:
hi to start with the fp001 is the programer that u use to load the :dba: with it's new firmware u need to call ict and they will send u the proper flash for your dba, u can not use the fp001 under window's7 the best i have ever found bar none is xp the fp001 hook's to your serial port of the host putter,then it is hooked via a rj45 cable to the dba,on the dba is 8 switch's u turn all of them off expect for sw6 or 4 it is in the manual i have 90% of the ict file's and manual's pv77 come's in alot of dif confg's 12v/24v/34v/120v it could be host controled ie the machines putter tell's it to run or it could come as stand alone,do u know what machine this unit came out of ? this will go along way.. also are u usa? canadian? or eroupe? these answer's are nessary because the bin file's change acrodley ed |
| zaaid1989:
Thank you very much ed12 for the detailed reply. It clears a lot of things. First of all, I am from Asia (Pakistan). I came to know that bill acceptors are used in the vending machines. Vending machines are very rare here in my country. So, I was researching how feasible it is to build a vending machine. A friend of mine brought the bill acceptor from China and he says it accepts the local currency i.e. Pakistani rupees but only new notes(bills). I want to test the bill acceptor and make it work with the old notes. If it works I might import more. So, I will write to ICT for the fp001 programmer. Can you tell me what else do I need to make the bill acceptor function and also calibrate it to accept old notes(bills) as well? |
| ed12:
hi i will talk to calif. this afternoon and see if there is a bin as a rule if it take's the new money it should take the old when u request the fp001,also request an aligment card it is a white card with 8 black bar's on it also go to ict.com/tv that should be the head office in tiwian where u can get the manual for your unit ed |
| ed12:
hi i chatted with calif. they are sending me an e-mail for what they need to know then we can move foward ws |
| Navigation |
| Message Index |
| Next page |