| Main > Main Forum |
| Electrical Issues: Hatch Lift - Battletech Pod - Tail Gate Lift Motor |
| << < (10/21) > >> |
| BadMouth:
--- Quote from: kahlid74 on January 26, 2013, 11:27:51 am ---I realized that the mechanism is going to pull the door up a little bit before it pulls it out. --- End quote --- I thought that when you posted drawings, but didn't comment because I thought it would be stating the obvious. :lol I just assumed the door was going to be oversized and on the outside of the pod in real life. |
| BadMouth:
You could ditch the whole door lifting idea and have it slide toward the front. I think it would look cool. It would be easier to do and require no clearance. |
| TopJimmyCooks:
Did you pull the ac unit from that Honda? looks like it's gonna be hot in there. |
| PL1:
--- Quote from: kahlid74 on January 26, 2013, 01:15:06 pm ---I'll look at the tools I have and how I could make this cut. Jigsaw/Circular Saw/Router. Hmmm. I'm not really going to be able to take the door off so it's going to be a tricky cut. --- End quote --- Maybe a piece of lumber (1x4, 2x4, etc.) screwed to the door to act as a straight edge guide for your router? Drill start and stop holes for the router bit. Chain drill several small holes and use a chisel to carefully break through the last little bit. Scott |
| danny_galaga:
--- Quote from: TopJimmyCooks on January 26, 2013, 03:05:12 pm ---Did you pull the ac unit from that Honda? looks like it's gonna be hot in there. --- End quote --- :duckhunt |
| Navigation |
| Message Index |
| Next page |
| Previous page |