Main > Main Forum
Anyone have Weecade plans in Photoshop?
<< < (2/3) > >>
jammin0:
You might get this from LeChuck but then you'll have some choices right.  These are from HaRuMaNs DWG plans that he had cut on the CNC.  They are arranged to cut from 2 2X4 pieces of MDF.
https://www.dropbox.com/s/p7pzipffxbdti1g/weecadcut1.psd
https://www.dropbox.com/s/4geukzcy5u1j24m/weecadcut2.psd
ChadTower:

--- Quote from: mcseforsale on January 09, 2013, 11:44:41 pm ---I'm in a new position now (about 5 months) that's requiring me to learn about 8 new technologies...including Linux security, and constant build integration for a bunch of 20-something programmers and I'm a bit thin on my bandwidth to pay attention to learning P-shop.

--- End quote ---


Configuration Management/Release Engineering?
mcseforsale:
Yep.  Git, FinalBuilder, Jenkins, AccuRev, .NET C#, etc. etc. etc. 

AJ



--- Quote from: ChadTower on January 10, 2013, 09:47:42 am ---
--- Quote from: mcseforsale on January 09, 2013, 11:44:41 pm ---I'm in a new position now (about 5 months) that's requiring me to learn about 8 new technologies...including Linux security, and constant build integration for a bunch of 20-something programmers and I'm a bit thin on my bandwidth to pay attention to learning P-shop.

--- End quote ---


Configuration Management/Release Engineering?

--- End quote ---
mcseforsale:
Thanks Jammin0!  That should help a lot!

AJ
Le Chuck:
MC, here is a fullsize side panel at 300 dpi.  It measures 540mmx461mm. If you need to reduce the resolution you can go Image>Image Size and then replace the 300 in the dpi box with whatever you're working with and the shape should scale down without issue.  Let me know if there are any issues with the file. Cheers.
Navigation
Message Index
Next page
Previous page

Go to full version