Main > Reviews

Paradisearcadeshop's import trigger/flight stick review

<< < (2/2)

Jumpman64:
You can mount these on plywood with a little prep.  What I did was route the underside of the panel down to about 1/4", maybe slightly less.  Then I used a countersink bit on the top to create a place for a flat head style machine screw to sit down flush, beneath the overlay.  It's a tight fit.  You can't see any of the metal shaft on my installation, but the stick moves fine in it's hole and it feels solid.

Gray_Area:

--- Quote from: Jumpman64 on February 18, 2013, 10:35:25 am ---You can mount these on plywood with a little prep.  What I did was route the underside of the panel down to about 1/4", maybe slightly less.  Then I used a countersink bit on the top to create a place for a flat head style machine screw to sit down flush, beneath the overlay.  It's a tight fit.  You can't see any of the metal shaft on my installation, but the stick moves fine in it's hole and it feels solid.

--- End quote ---

I'd be worried about that cracking over time....

Navigation

[0] Message Index

[*] Previous page