| Main > Main Forum |
| Aimtrak recoil issues... (solved) |
| << < (3/3) |
| 8BitMonk:
Some other considerations: * If you don't use the connector that secures itself I'd put it on the side of the control panel rather than bottom so the weight of it doesn't make it fall out. * It's not always great to have the guns hooked up when you're not using them, they just get in the way. So with a screw type connector it's more of a chore to unhook and hook them. * Also with a separate usb connector when the guns are unplugged you can use them for other devices, controllers etc. Mine looks like this: Good Luck. |
| letraitplat:
--- Quote from: rcub3 on January 19, 2013, 11:52:12 pm ---Finally. I have one fully functional gun with recoil. I did have to go with more A's: went from 1.4A to 3A, and the recoil didn't miss a single solenoid kick and the power supply handled it just fine. This is what I got: http://www.ebay.com/itm/130835271171?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Now, back to the gun from the original post above... --- End quote --- Hello I'm in the process of building my own aimtrak recoil guns, and I'm searching for a good reliable psu, with enough length of cable to confortably play in front of the cabinet. Could you provide more info about this PSU, it's not visible on ebay anymore ? Brand, power, cable length, price...? Thanks in advance |
| Navigation |
| Message Index |
| Previous page |