| Main > Main Forum |
| Reunion Pacman Joystick Question |
| << < (4/5) > >> |
| yotsuya:
If you're top mounting, then the Reunion stick should be fine. Mine's under about 1/4 combined plexi and metal, and I love it. |
| Well Fed Games:
--- Quote from: yotsuya on December 18, 2012, 11:10:39 am ---If you're top mounting, then the Reunion stick should be fine. Mine's under about 1/4 combined plexi and metal, and I love it. --- End quote --- Agreed, should work fine. |
| Evilpenguinj:
Hi Guys The joystick is bottom mounted so routed from below. So knowing this do you think I will still be ok with the Reunion joystick? Also I have an email into the guy at Tornado Terry because he sells one with a longer shaft. Jason |
| RandyT:
--- Quote from: Evilpenguinj on December 18, 2012, 05:16:22 pm ---The joystick is bottom mounted so routed from below. So knowing this do you think I will still be ok with the Reunion joystick? Also I have an email into the guy at Tornado Terry because he sells one with a longer shaft. --- End quote --- The short version is going to be too short. If you are ok with changing the dynamic of the stick a bit, and don't wish to modify the panel, then the longer shaft is your only real option. |
| Evilpenguinj:
Hi Guys Wanted to thank you all for your input. I decided to go with a stick with a longer shaft from Tornado Terry's. I hope it works out! Thanks Jason |
| Navigation |
| Message Index |
| Next page |
| Previous page |