Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: 1986 AMI R91 jukebox  (Read 1424 times)

0 Members and 1 Guest are viewing this topic.

beefybarb

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:January 15, 2013, 11:34:49 am
  • I want to build my own arcade controls!
1986 AMI R91 jukebox
« on: December 18, 2012, 06:35:39 pm »
HI   I have had this jukebox about 2 years,it has played perfectly up till last week.when the problem started. After selecting the records, the arm is moving towards the start of the record, but then suddenly jumps further on, and so misses the start. Have you any ideas as to why this is happening?
Yours Tony
Logged

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1085
  • Last login:July 19, 2020, 01:22:45 pm
Re: 1986 AMI R91 jukebox
« Reply #1 on: December 19, 2012, 06:15:32 am »
Hello Tony,

Check that the Tone Arm Cam is not broken, also that the two pins on the end of the tone arm that follow the tone arm cam are infact there and that one of the pins has not broken off, also check that the tone arm wiring is not binding causing the issue.

Regards
Alan

Alan Hood
ami-man
UK
Logged

beefybarb

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:January 15, 2013, 11:34:49 am
  • I want to build my own arcade controls!
Re: 1986 AMI R91 jukebox
« Reply #2 on: December 22, 2012, 04:48:22 pm »
Hi Alan,
thanks for the info, I have checked the cam, and the pins, and both are ok, it could possibly be the wiring, so any advice as to where I can get  new wiring if needed.

Regards Tony
Logged
Pages: [1]
  
Go Up
« previous next »