Main > Project Announcements

2-Player Street Fighter Themed Bartop

(1/10) > >>

CoryBee:
Number 3 - "2 Player Bartop"

Got a ton of the work done last night, side panels were already cut and shown in this thread "Trio of Bartops"

Side panels trimmed to accept the future control panel box







Supports added





Chose to use particle board for the base because my MDF board is too thick, would add to much height to the thing



Cp base glued and clamped in place, all screws used on this are just to hold pieces together and will be removed and filled up after it dries













Cp top cut and rounded





Sanding any blemishes or miss cuts



Smooooooth



Laptop mount made out of 0.75" x 0.75"













 :cheers:

fighterfanatic:
 :applaud: Nice. Tuned in! Eagerly awaiting updates.

CoryBee:
Speaker panel cut and added



Paint + Speaker holes drilled and special gap routed behind it

CoryBee:
Had to remove the control panel cause I forgot to route for t-molding first, not a big issue. Also easier to add the final layer of paint with it off.

Routed





I broke one of the contacts on the speaker that came on the PC amplifier (cheap thing), so I replaced both of them with some TV speakers I had from a broken screen set. Hooked up to the amp and all is well again, actually sounds way better.

BadMouth:
I can't keep up with all your builds.  :dizzy:

Navigation

[0] Message Index

[#] Next page