Main > Main Forum
Help me like my Omni2 stick
RandyT:
The mods you have made to the stick may have taken it beyond the point of simple tweaks. The first thing you should probably do is attempt to reverse anything you've already done. Clean out the Vaseline with something like isopropyl, as it is usually ok to use on nylon. Inspect the socket, and if it's still ok, then lightly lube with something like the SuperLube shown above. If the spring is already stretched too far, you can put it in a vise, adjust it to the size you want and heat it with a propane torch. When it cools, it should retain the size. You can purchase several different springs from other sources, if you would rather go that route, but tuning one to your specific desires may be the better approach. If you don't mind the noise, look for some 100gram force micros. We don't carry these, as there is little demand.
There are pages on the web devoted to the tuning of these kinds of sticks, as they are popular among the fighter crowd who demand more from their controls. They also tend to be very meticulous when it comes to maintenance. There's a lot of good info out there on the subject.
But in the end, they will probably never feel like a Happ Competition. If that's what you are shooting for, then you'd be better off sticking with that type of stick. The folks who use the Japanese-style designs tend not to like them as much, but that's why there are so many options. It really is a preference thing.
TGov:
I have an Omni2 as well and can't say that I am a fan of it. The action is just too light for me and it will often 'stick' in the right position.
RandyT:
--- Quote from: TGov on December 03, 2012, 12:37:39 pm ---I have an Omni2 as well and can't say that I am a fan of it. The action is just too light for me and it will often 'stick' in the right position.
--- End quote ---
If it is sticking , that's not normal operation. Contact me by email, and I will see what can be done to address the issue.
RandyT
rCadeGaming:
--- Quote from: Le Chuck on December 02, 2012, 08:52:50 pm ---I'd lean towards "it's probably not your bag" rather than to start calling the product crappy since you've never used one.
--- End quote ---
I never said it was definitely crappy. I said it sounded crappy from his description, which is true. It also sounds crappy from MGB's description, and TGov's description.
I'd agree with the suggestions above. Clean it thoroughly with rubbing alcohol and replace the lube with proper Molykote 44. This is what I do on all my sticks.
RandyT:
--- Quote from: rCadeGaming on December 03, 2012, 12:46:43 pm ---I never said it was definitely crappy. I said it sounded crappy from his description, which is true. It also sounds crappy from MGB's description, and TGov's description.
--- End quote ---
Considering that we have shipped these in the hundreds, a few negative comments isn't much of a consensus. Unfortunately, with a mass produced item, it's inevitable that a couple of issues could arise once put into actual use. We test all of them before they get shipped, but beyond that, there's not much we can do, other than provide support after the sale. Everyone uses controls differently, so a particular stick that may hold up fine forever with someone who uses their fingertips on the ball to control the game, may not not fare as well with a player who rocks the machine every time they make a move. Like any assembly with moving parts, wear will make a difference in performance. When that wear manifests into something noticeable will based on a number of factors, including a possible "dud" from the factory, from which no item is immune.
--- Quote ---Clean it thoroughly with rubbing alcohol and replace the lube with proper Molykote 44. This is what I do on all my sticks.
--- End quote ---
This seems to be the most recommended lube for this type of stick. I'll get some to compare with the SuperLube, which is pretty amazing stuff. SL is also viscous enough to stay put, which is important in this application.