| Main > Main Forum |
| Coin door light wiring help |
| (1/1) |
| Firepro4Life:
So I am trying to wire up some 12v coin door lights to the power supply of my 60-in-1 nd I am having a little trouble. I bought this harness from the link below rather than make my own and connected it to the power supply, but for some reason the bulbs won't light. I tried connecting various connection combinations of the power and ground and got one bulb to light, so I know it's receiving power, but I can't seem to get both to light. The harness has 14 connectors...are there are particular ones I should be connecting to the bulbs? I didnt think it mattered if all 14 are not used, but what do i know. Sorry if this is a noobish question and any help is greatly appreciated. http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=66&products_id=385 |
| DaOld Man:
I cant get your link to open. Are the lights LEDs? If so, try switching the wires on them (polarity matters with an LED). |
| Firepro4Life:
Fixed link. Yes, they are LEDs. I'll try switch around the wires and see if that works. |
| Firepro4Life:
Yep, just had to switch the 12v and ground connectors. Thanks, otherwise I'd still be staring at wires dumbfounded. |
| Navigation |
| Message Index |