| Main > Main Forum |
| Modding a Wico Command Control? |
| (1/2) > >> |
| mathdufort:
Hi, I have a couple of old Wico Command Control (bat) from my commodore 64 and I loved those joysticks. I was wondering if they could be modded and placed on an arcade control panel and hooked up to an I-Pac? Here's a picture of the said joystick: http://atariace.com/images/atariace.com/atari/images/joysticks/wico_command_control.jpg Thank you for your help! |
| ChadTower:
Yep, that could be done easily. Cut the plug off, find out which wire is ground and which are for which direction/button, and you're all good. |
| PL1:
Option #2 - Wire up a 9 pin D-sub so you don't have to chop off the connector. C64 used this pinout configuration. Same basic pinout as Atari 2600 joysticks. Scott |
| paigeoliver:
I used to have one of those, it is easily hooked up but not so easily mounted. |
| mathdufort:
Thanks for the replies! I'll look into it for a future project. ;D |
| Navigation |
| Message Index |
| Next page |