Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Denver?  (Read 11706 times)

0 Members and 1 Guest are viewing this topic.

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #40 on: February 24, 2013, 03:22:17 pm »
Sounds good, I checked with my offline scheduler, and it doesn't look like she has anything planned for the next couple weekends.

We've got about 7" down here in the Ranch. I'm not shoveling anything until it stops... not like on of my neighbors who has already shoveled three times. Ain't nobody got time for that!
BitKit 8bit FPGA Multi - http://craftymech.com

Furry131

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 137
Denver?
« Reply #41 on: February 24, 2013, 04:52:11 pm »
We have 8 inches at last check.  So instead of doing nothing today I decided to brew some beer. Should be ready in about a month or so!!!  Making a orange hefeweizen!!!! Like widmers.  Should be yummy
« Last Edit: February 24, 2013, 04:54:52 pm by Furry131 »

sharpfork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 607
Re: Denver?
« Reply #42 on: February 24, 2013, 05:11:37 pm »
We should have the .eethp at your place O0

SIII + Cyanogen + Tapatalk 2


Furry131

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 137
Denver?
« Reply #43 on: February 24, 2013, 05:19:32 pm »
Lol I would be ok with that but my games suck.  My mame is a crappy machine I got off Craig's list. It works fine for me but needs lots of help! Runs just fine but looks like ---steaming pile of meadow muffin---.   And my golden tee fore /tekken 3 is not bad.  But I would be too embarrassed to show them to people who know what arcades are support to look like. :-(

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #44 on: February 24, 2013, 06:14:26 pm »
You forgot the golden rule though... the more beer is consumed, the better the games look.
BitKit 8bit FPGA Multi - http://craftymech.com

sharpfork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 607
Re: Denver?
« Reply #45 on: February 24, 2013, 06:55:16 pm »
Furry

I forgot that we were meeting up with an arcade game focus.  I was thinking homebrew!
8)

SIII + Cyanogen + Tapatalk 2


Furry131

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 137
Denver?
« Reply #46 on: February 24, 2013, 08:20:45 pm »
Lol point taken.  Maybe we can do it in march at my place for some homebrews.  Straight from the keg!

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #47 on: February 25, 2013, 12:13:23 pm »
I'm always up for beer in any form :)

What I really needed this morning was a wifi enabled snow blower and a Jamma harness.
BitKit 8bit FPGA Multi - http://craftymech.com

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #48 on: March 07, 2013, 10:48:21 am »
The stack of quarters on my desk is growing larger...
BitKit 8bit FPGA Multi - http://craftymech.com

Nephasth

  • Guest
  • Trade Count: (0)
Re: Denver?
« Reply #49 on: March 07, 2013, 10:53:37 am »
You guys going to the Rocky Mountain Pinball Showdown?

Furry131

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 137
Re: Denver?
« Reply #50 on: March 07, 2013, 02:14:35 pm »
You guys going to the Rocky Mountain Pinball Showdown?

I know I am planning hitting up RMPS on the Saturday session. Just trying to convince the wife to go.


The stack of quarters on my desk is growing larger...

I am booked this weekend thanks to my cruise director. I think I could do next weekend.... I don't think I will be too drunk that weekend.
« Last Edit: March 07, 2013, 02:17:26 pm by Furry131 »

sharpfork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 607
Re: Denver?
« Reply #51 on: March 07, 2013, 09:12:00 pm »
You guys going to the Rocky Mountain Pinball Showdown?

I've thought about it that last couple of years but have never attended.  Maybe this would be a good thing to do a meetup for.  That way Furry131 doesn't have to talk his wife into going :D.

How does the 16th or 17th of this month look for a 1up meetup?  The 17th is St. Patrick's Day if that means anything.  I personally prefer earlier in the day because it is much less busy.

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #52 on: March 08, 2013, 12:28:49 pm »
The 16th works better for me, earlier in the day is cool. Hopefully Exidy will have a shump setup by then!
BitKit 8bit FPGA Multi - http://craftymech.com

Furry131

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 137
Re: Denver?
« Reply #53 on: March 13, 2013, 10:25:33 am »
I'm good to meet up on Saturday during the day. 12 or 1 is best....

sharpfork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 607
Re: Denver?
« Reply #54 on: March 13, 2013, 02:40:49 pm »
I'm good for Sat too.  Shall we say 12:30?

Furry131

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 137
Re: Denver?
« Reply #55 on: March 13, 2013, 04:47:56 pm »
sounds good to me :cheers:

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #56 on: March 13, 2013, 09:52:21 pm »
Sounds like a plan!
BitKit 8bit FPGA Multi - http://craftymech.com

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #57 on: March 15, 2013, 02:05:10 pm »
Any word if Exidy put in a Shump cabinet at the 1UP?
BitKit 8bit FPGA Multi - http://craftymech.com

sharpfork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 607
Re: Denver?
« Reply #58 on: March 15, 2013, 02:44:28 pm »
Any word if Exidy put in a Shump cabinet at the 1UP?
I haven't heard any.  I guess we'll find out tomorrow  :applaud:

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #59 on: March 15, 2013, 09:26:15 pm »
Just realized the St. Pattys Day parade is tomorrow from 10-2pm, and the route goes down Blake, right in front of the 1up. Can we move the time to 2:30? It might be rainy tomorrow, but the parade usually has a big turnout and that end of downtown will have be packed.
« Last Edit: March 15, 2013, 09:27:54 pm by CraftyMech »
BitKit 8bit FPGA Multi - http://craftymech.com

Furry131

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 137
Denver?
« Reply #60 on: March 15, 2013, 10:04:18 pm »
Just realized the St. Pattys Day parade is tomorrow from 10-2pm, and the route goes down Blake, right in front of the 1up. Can we move the time to 2:30? It might be rainy tomorrow, but the parade usually has a big turnout and that end of downtown will have be packed.

Yeah I was just about to suggest that.  Pretty sure I can make the 230 time. 

sharpfork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 607
Re: Denver?
« Reply #61 on: March 15, 2013, 10:28:31 pm »
How about 12:30 at the 2up and we avoid the parade crowd altogether?

SIII + Cyanogen + Tapatalk 2


CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #62 on: March 15, 2013, 11:34:08 pm »
I checked the 2up's Saturday hours, and the website says "opens at 3pm daily".
BitKit 8bit FPGA Multi - http://craftymech.com

sharpfork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 607
Re: Denver?
« Reply #63 on: March 15, 2013, 11:41:46 pm »
Crap.  I just checked 1up and they are doing 21+ only tomorrow, expecting to be busy for the parade.

SIII + Cyanogen + Tapatalk 2


CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #64 on: March 15, 2013, 11:58:15 pm »
Hopefully by 2:30 a lot of the parade crowd will have moved out... or passed out.
BitKit 8bit FPGA Multi - http://craftymech.com

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #65 on: March 16, 2013, 01:36:42 pm »
I'm going to drive down there closer to 2, hopefully the parade has wound down by then.
BitKit 8bit FPGA Multi - http://craftymech.com

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #66 on: March 16, 2013, 08:46:44 pm »
Good meeting up with you guys today! That place was packed by the time we left. Good to see them do so much business, maybe they will open up 3up one day on the north/south end of town. Finally found a use for all the quarters on the dresser.  :cheers:
BitKit 8bit FPGA Multi - http://craftymech.com

sharpfork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 607
Re: Denver?
« Reply #67 on: March 20, 2013, 09:03:20 pm »
I'm thinking about heading here one day, maybe Sunday:

http://www.pinballshowdown.com/

Anyone else going?

Nephasth

  • Guest
  • Trade Count: (0)
Re: Denver?
« Reply #68 on: March 20, 2013, 11:49:11 pm »
Friday and Saturday. Booked my room yesterday. :)

idsane

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 125
Re: Denver?
« Reply #69 on: March 30, 2013, 10:09:31 pm »
Man, wish I wouldn't have missed that event, but I am down for a meetup and the 1up or 2up to drink some beers and play some games any time Denver people!

Furry131

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 137
Denver?
« Reply #70 on: March 30, 2013, 11:12:41 pm »
Cool keep an eye on here. I think we are going to meet up in April??? What event did you miss?? The rmbp isn't until the end of the month.

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #71 on: March 31, 2013, 12:35:46 pm »
I'm definitely up for an April meet-up!
BitKit 8bit FPGA Multi - http://craftymech.com

idsane

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 125
Re: Denver?
« Reply #72 on: April 08, 2013, 06:00:09 pm »
Oops I misread the dates! Have you all been to the 2up yet? I haven't checked it out myself.

sharpfork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 607
Re: Denver?
« Reply #73 on: April 08, 2013, 08:52:30 pm »
We haven't done a 2meetUP yet but I've been there a bunch of times.  They are close enough that we could easily hit both locations in an afternoon.

I'm down for a meetup sometime this month.
I'm good the 20th, 27th, or 28th in the afternoon/ evening.  how about y'all?

Nephasth

  • Guest
  • Trade Count: (0)
Re: Denver?
« Reply #74 on: April 09, 2013, 01:30:26 pm »
I'll be hitting up the 1UP and 2UP either on the 26th or the 27th or both, while I'm down there for the Showdown.

CraftyMech

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 482
  • I love the smell of solder in the morning...
    • craftymech.com
Re: Denver?
« Reply #75 on: April 10, 2013, 02:41:06 am »
27th in the afternoon, or 28th afternoon/evening both work for me!
BitKit 8bit FPGA Multi - http://craftymech.com

idsane

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 125
Re: Denver?
« Reply #76 on: April 10, 2013, 08:42:30 am »
Afternoon of the 28th looks good for me right now.

sharpfork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 607
Re: Denver?
« Reply #77 on: April 10, 2013, 10:03:56 am »
You guys going to the Rocky Mountain Pinball Showdown?

I totally forgot about this.  I think the 1/2meetUP should work with forlks headed to the Pinball showdown.  Or even better, we should do a RMPS meetup AND a 1/2up deal.
http://www.pinballshowdown.com/attend.html
Quote
Fri., April 26: 11 am - midnight
Sat., April 27:  9 am - midnight
Sun., April 28:  9 am - 5 pm


Play over 36 hours of free pinball and classic arcade games

Admission
$20 per day adult;
$50 adult 3-day pass

Sunday is the easiest for me to make; but, I could rearragne a few things on my schedule and make later Saturday.

Is anyone in additon to Nephasth comitted (or very interested) to going to the RMPS?

Furry131

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 137
Re: Denver?
« Reply #78 on: April 11, 2013, 02:52:49 pm »
I am going to the RMPS... not sure what date or time yet!  I think Saturday or Sunday would work for me.... I would probably do both places. I think we should work around Nephasth's schedule since he will only be down a few days.

Nephasth

  • Guest
  • Trade Count: (0)
Re: Denver?
« Reply #79 on: April 11, 2013, 04:29:38 pm »
Not sure what time I'll be leaving town that Saturday to head back. I'll be bringing a KLOVer from Casper down with me, and I'm not sure what his travel plans are for heading back home, which is another 180 miles after getting back to Cheyenne. But I'm more than flexible during the days I'll be there.

On a side note... Looking forward to playing WOZ. :)

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31