Main > Project Announcements

Classic Cabinet : lots in one!

<< < (2/3) > >>

Unstupid:
there is a program you run on your computer that transfers the roms to the sd card.  Its pretty easy...  Yea those little jamma boards make this hobby a lot easier.  No interface boards (ipac, etc..), no windows configuring, no front end configuring etc.. etc..  Then again you are linited to what's available (mostly classics) on those less powerfull boards...   ;)

ArcadeDunce:
it'd be even cooler if you could wire it so for four player games like Simpsons, you could press player 1 2 3 or 4 buttons and the proper character comes up. That way, you only need one or two joy sticks and you don't have to switch wires to get the character you want :).

PL1:

--- Quote from: ArcadeDunce on November 12, 2012, 03:38:59 pm ---it'd be even cooler if you could wire it so for four player games like Simpsons, you could press player 1 2 3 or 4 buttons and the proper character comes up. That way, you only need one or two joy sticks and you don't have to switch wires to get the character you want :).

--- End quote ---

*cough*

"simpsons2p", etc.   ;D


Scott

ArcadeDunce:
OK, so the next question is, what's a good plan set for pac-man cabinet dimensions,
and what is the easiest way to cut the two biggest side pieces of wood?

dfmaverick:

--- Quote from: ArcadeDunce on November 14, 2012, 09:11:41 pm ---OK, so the next question is, what's a good plan set for pac-man cabinet dimensions,
and what is the easiest way to cut the two biggest side pieces of wood?

--- End quote ---

Not sure if there are others, but here is a link to the plans on jakobud.com.

http://www.jakobud.com/plan.php?id=23

May not be 100% but should get you close.

Navigation

[0] Message Index

[#] Next page

[*] Previous page