Author Topic: 0#17 (Read 47997 times)

Arturius · « **Reply #1 on:** November 07, 2012, 07:13:57 am »

That looks amazing!, i look forward to reading your thread

jmike · « **Reply #2 on:** November 07, 2012, 07:25:23 am »

Been waiting for this announcement since you posted the original design.

Will follow this build closely.

Termin8tor · « **Reply #3 on:** November 07, 2012, 07:47:40 am »

boomstick · « **Reply #4 on:** November 07, 2012, 08:40:37 am »

Well, I have to say that is one sexy concept you have there! I'm not normally a fan of bar-tops, but damn this one makes me reconsider!

Can't wait to see your progress as you get to work on Zenolix.

dextercf · « **Reply #5 on:** November 07, 2012, 10:25:37 am »

Looking good!

Sent from my iPhonophonoponononon.

SNAAKE · « **Reply #6 on:** November 07, 2012, 11:34:51 am »

make me one plz. will pay

eds1275 · « **Reply #7 on:** November 07, 2012, 11:48:13 am »

This won't divert attention away from the Astro cab will it?

Unstupid · « **Reply #8 on:** November 07, 2012, 01:57:00 pm »

6 button vertical games?

SpaceHedgehog · « **Reply #9 on:** November 07, 2012, 02:04:56 pm »

Great looking design. I also happen to like anything that ends in 'lix' and has sharp angles.

werdna · « **Reply #10 on:** November 07, 2012, 03:37:58 pm »

Quote from: Unstupid on November 07, 2012, 01:57:00 pm

6 button vertical games?

Maybe Ond is a big Daioh fan?

-Andrew

selfie · « **Reply #11 on:** November 07, 2012, 04:37:38 pm »

Very cool!! Hit me up if you want some bits of acrylic or some LASER cutting done. You're close enough that I can ship to you...

Le Chuck · « **Reply #12 on:** November 07, 2012, 05:32:06 pm »

who's got two thumbs and is all excited for this build??? THIS GUY!

opt2not · « **Reply #13 on:** November 07, 2012, 06:38:43 pm »

You going to finish Retro-future first

Ond · « **Reply #14 on:** November 07, 2012, 07:04:20 pm »

selfie · « **Reply #15 on:** November 07, 2012, 07:18:34 pm »

Quote

Thanks mate; you did some very fine work on your version of this design. I may just take you up on that offer, maybe to cut the logo for the back and or the marquee logo also? Can you cut from a DXF or DWG file?

The LASER itself runs on DXF but I run everything through Corel X6 so I can convert just about any file format.

Ond · « **Reply #16 on:** November 07, 2012, 08:35:54 pm »

emphatic · « **Reply #17 on:** November 08, 2012, 05:07:41 am »

This is... relevant to my interests.

Ond · « **Reply #18 on:** November 11, 2012, 04:52:12 am »

emphatic · « **Reply #19 on:** November 11, 2012, 06:36:00 am »

Sweet!

jmike · « **Reply #20 on:** November 11, 2012, 09:14:13 am »

Nicely done on the template OND.
You are adding the marquee, right?

Ond · « **Reply #21 on:** November 11, 2012, 04:31:11 pm »

wol-nz · « **Reply #22 on:** November 12, 2012, 06:07:50 pm »

Hell! Time after time you just seem to create these awesome original concepts. I absolutely love this design.
I could even see some of my graphics being placed on a bastardized version of this

I'll certainly be watching with gusto!
I'm trying to imagine how your going to be able to open it to maintain the internal components.
The only feasible option i could think is your going to create some form of a trap door on the underneath panel?

thatpurplestuff · « **Reply #23 on:** November 12, 2012, 07:11:01 pm »

Haha even OND's method of creating cut templates makes me feel like an amateur. Can't wait to see how this build turns out!

(by the way, I feel a whole lot better about my some of my Ryobi tools knowing that OND uses them to create his arcades.)

Ond · « **Reply #24 on:** November 13, 2012, 06:06:54 am »

wol-nz · « **Reply #25 on:** November 14, 2012, 07:52:16 pm »

I think your right on the money with having something bold and clean.

If it was me i'd try to do some stenciling. When i look at the concept model i just see an abundance of angles. Opposed to the rounded motif.
It may work better to bring that angular feel into the control panel?
I'd use the same blue your painting on the side and rear on the CP and bring the grey from the bezel down as well.
here's a raw idea...

Ond · « **Reply #26 on:** November 14, 2012, 08:23:37 pm »

Jigenjuke · « **Reply #27 on:** November 14, 2012, 09:33:11 pm »

Hey there OND,

Great design as usual

. When I first saw your mockup the first cabinet that popped to mind was STERN's BERZERK. I think if they had your cabinet desiging skill back in the day the BERZERK cabinet would have looked great as your xENOLIx cabinet. Sorry I took the liberty of lowercasing the Xs. Looks kinda cool. Some mentioned stencils and it clicked. I messed around on illustrator for about 15 minutes and this is what I came up with. Do what you wish with it, you'll probably come up with something infinately more awesome, but....

Jigenjuke

If you want to mess around with the illustrator file let me know.

Ond · « **Reply #28 on:** November 15, 2012, 01:09:19 am »

Ond · « **Reply #29 on:** November 15, 2012, 05:30:20 pm »

kingchimp · « **Reply #30 on:** November 15, 2012, 05:52:49 pm »

I have no doubt that whatever you come up with will be super sneaky and awesome. However if you're not happy with the end result, maybe take a look at the Spark Optical Sensor here: http://godlikecontrols.com/

It's a unit that you swap in place of the microswitches. Should be nice and quiet.

selfie · « **Reply #31 on:** November 15, 2012, 08:28:17 pm »

in2amusements.com.au I'll have to try them out. I'm just about over supporting local suppliers when it takes a week longer to get something locally, not to mention the extra cost.

I'm still waiting for a spinner I ordered nearly two weeks ago from a local supplier.

BadMouth · « **Reply #32 on:** November 15, 2012, 09:11:09 pm »

Quote from: Ond on November 15, 2012, 05:30:20 pm

And then in a flash I had it! In the coming days I'll post up a mod for this stick to make it silent and super SHMUP responsive. Also the mod can be reverted back to standard JLF in about 30 seconds (not including wiring connections). For now its secret OND business

(holds off on JLF optical mod until he see's what Ond's up to......)

emphatic · « **Reply #33 on:** November 16, 2012, 02:39:55 am »

Maybe there's still hope for the lonely JLF I have in storage after all.

Unstupid · « **Reply #34 on:** November 16, 2012, 04:22:36 am »

Pretty sure paradise arcade shop sells a silent JLF.... Not cheap though....

PL1 · « **Reply #35 on:** November 16, 2012, 04:58:09 am »

They do sell silent JLFs.

They also have a mod kit with Zippyy switches and a .187" QD to JLF-style adapter harness or a kit with Cherry switches and a .187" QD to JLF-style adapter harness.

Scott

emphatic · « **Reply #36 on:** November 16, 2012, 06:21:00 am »

Stop posting solutions, you'll stop the innovation!

BadMouth · « **Reply #37 on:** November 16, 2012, 07:19:16 am »

I tried the zippy switches in the JLF and they don't work that well with the round and octagon restrictors.
The restrictor being smaller and sitting closer to the joystick body causes the ledge on the actuator to catch occasionally.
Silent omron switches work, but for what they cost, you could almost buy the basic optical setup.

The plan for my new cab was to use the SparkCE sensor and replace the adjustment pot with some type of command line controlled variable resistor. So for shmups, it could be super sensitive and for 4-way games, the sensetivity would be low enough only one switch would be tripped at a time. I'm not done looking, but the best idea I've come up with so far for a computer controlled resistor is an LED and a photosensor.

Sigh, the more I talk about this idea, the more I want to do it, so I guess I'll go ahead and order the SparkCEs.

Hope I'm not

when I see Ond's solution.

PL1 · « **Reply #38 on:** November 16, 2012, 07:33:24 am »

emphatic - Sorry bout that. I'll try not to do that in the future.

Ond - You know you want to join them in saying. . . .

(Couldn't find a video clip of the "You didn't see anything" line from Madagascar.)

Scott

CoryBee · « **Reply #39 on:** November 16, 2012, 07:50:33 am »

Quote from: PL1 on November 16, 2012, 07:33:24 am

(Couldn't find a video clip of the "You didn't see anything" line from Madagascar.)
Scott

Ond · « **Reply #40 on:** February 17, 2013, 05:41:32 am »

emphatic · « **Reply #41 on:** February 17, 2013, 08:38:47 am »

Holy carp, it's happening!

jmike · « **Reply #42 on:** February 17, 2013, 10:08:03 am »

Quote from: emphatic on February 17, 2013, 08:38:47 am

Holy carp, it's happening!

What he said!

Ond · « **Reply #43 on:** February 21, 2013, 02:53:42 am »

Unstupid · « **Reply #44 on:** February 21, 2013, 02:58:25 am »

Didn't you build this already? Or was that someone else?

Ond · « **Reply #45 on:** February 21, 2013, 03:07:28 am »

CoryBee · « **Reply #46 on:** February 21, 2013, 05:18:41 am »

Quote from: Unstupid on February 21, 2013, 02:58:25 am

Didn't you build this already? Or was that someone else?

I was thinking that too, Deja vooooo'd me. Nice to see a wooden version of it.

jmike · « **Reply #47 on:** February 21, 2013, 07:27:36 am »

Looking good Ond.
Can't wait for the marquee construction.

selfie · « **Reply #48 on:** February 21, 2013, 06:58:13 pm »

Quote from: Ond on February 21, 2013, 03:07:28 am

Quote from: Unstupid on February 21, 2013, 02:58:25 am
Didn't you build this already? Or was that someone else?

Nope, this is the real thing complete with glowing marquee and rear logo and glowing front edge . selfie did a plastic version of my design last year.

a nice subtle dig at me taking the easy way out without the marquee

Looking good so far. The offer to LASER cut anything still stands too.

Ond · « **Reply #49 on:** February 21, 2013, 07:05:51 pm »

Ond · « **Reply #50 on:** March 02, 2013, 04:15:53 am »

Le Chuck · « **Reply #51 on:** March 02, 2013, 09:46:04 am »

Man, those are sharp. Gives me some ideas. Im loving where this is headed.

Nephasth · « **Reply #52 on:** March 02, 2013, 09:53:18 am »

Always enjoy watching an Ond build! Looking great!

emphatic · « **Reply #53 on:** March 02, 2013, 01:12:58 pm »

It's amazing how much those MDF pieces enhance the look of your cabinet.

Ond · « **Reply #54 on:** March 02, 2013, 04:35:32 pm »

Ond · « **Reply #55 on:** March 24, 2013, 09:16:45 am »

jmike · « **Reply #56 on:** March 24, 2013, 09:34:15 am »

Looking sweet!!
How are we normal humans suppose to recreate that marquee.

Le Chuck · « **Reply #57 on:** March 24, 2013, 09:39:07 am »

Have you tried steam bending MDF? I did it with hardboard and had great results. On small bends like that the jig would be fairly manageable as well. Just a thought for next time so you don't have to kerf if you don't want to.

Looking stellar btw

Ond · « **Reply #58 on:** March 24, 2013, 04:32:05 pm »

emphatic · « **Reply #59 on:** March 24, 2013, 04:59:15 pm »

This is so great. Can hardly wait for the paint job pics.

SNAAKE · « **Reply #60 on:** March 24, 2013, 05:42:37 pm »

Quote from: jmike on March 24, 2013, 09:34:15 am

Looking sweet!!
How are we normal humans suppose to recreate that marquee.

have me do it in photoshop...

but yeah whoa amazing work here

Ond · « **Reply #61 on:** March 24, 2013, 08:57:24 pm »

selfie · « **Reply #62 on:** March 25, 2013, 05:57:52 pm »

Being able to say I contributed is thanks enough

On the masking material, there is a signwriters vinyl specifically for masking that can be run through a vinyl cutter like a normal cut sticker. Also Application tape, the low tack masking tape, that is used to hold cut vinyl stickers together works well as a mask provided you use a very sharp knife to cut it.

Ond · « **Reply #63 on:** March 26, 2013, 05:13:34 am »

talkgeek · « **Reply #64 on:** April 13, 2013, 11:57:05 pm »

OND, The quality of your work / projects are just amazing - I'm def putting in a lot of hours here reading your posts

Ond · « **Reply #65 on:** April 14, 2013, 04:45:57 am »

jbenesh · « **Reply #66 on:** April 14, 2013, 09:39:42 pm »

Quote from: Ond on April 14, 2013, 04:45:57 am

It's great seeing quite a few new people rolling into the forum lately!. Playing games on your own hand-built MAME cabinet is sure enough great fun, but many find the actual build process the real buzz in the hobby.

Ond

As a total newbie on this board I have to say that your builds are nothing short of inspiring. I have to also say that yes, building can be much more fun than playing.

DGP · « **Reply #67 on:** August 02, 2013, 07:56:20 am »

Quote from: jbenesh on April 14, 2013, 09:39:42 pm

Quote from: Ond on April 14, 2013, 04:45:57 am

It's great seeing quite a few new people rolling into the forum lately!. Playing games on your own hand-built MAME cabinet is sure enough great fun, but many find the actual build process the real buzz in the hobby.

Ond

As a total newbie on this board I have to say that your builds are nothing short of inspiring. I have to also say that yes, building can be much more fun than playing.

Inspiring would be understated for me, his work is truly astonishing! If only I had OND's tools and even a small fraction of his skill set I would follow.

Between OND and Maximus my jaw is literally sore from the perma-grin, damn fun stuff here guys and please know that sharing it with the rest of us is greatly appreciated.

Jason

TopJimmyCooks · « **Reply #68 on:** August 02, 2013, 09:41:52 am »

apologies for the no content bump - needed to . . .

subscribe.

Santoro · « **Reply #69 on:** December 22, 2013, 11:03:01 pm »

^same. Subscribe. Looks really cool so far.

talkgeek · « **Reply #70 on:** December 23, 2013, 04:29:18 pm »

Quote from: DGP on August 02, 2013, 07:56:20 am

Quote from: jbenesh on April 14, 2013, 09:39:42 pm
Quote from: Ond on April 14, 2013, 04:45:57 am

It's great seeing quite a few new people rolling into the forum lately!. Playing games on your own hand-built MAME cabinet is sure enough great fun, but many find the actual build process the real buzz in the hobby.

Ond

As a total newbie on this board I have to say that your builds are nothing short of inspiring. I have to also say that yes, building can be much more fun than playing.

Inspiring would be understated for me, his work is truly astonishing! If only I had OND's tools and even a small fraction of his skill set I would follow.

Between OND and Maximus my jaw is literally sore from the perma-grin, damn fun stuff here guys and please know that sharing it with the rest of us is greatly appreciated.

Jason

I agree with the sentiments re amazing quality of work - also agree with OND re it turning out the build process is just as enjoyable (maybe more so) than playing on the finished article with your mates (or seeing a commissioned cab being just for the first time by the customer) - thanks for the amazing inspiration and creative ways you guys share with us on how to approach different challenges in this hobby of ours

EssexMame · « **Reply #71 on:** January 09, 2014, 05:58:36 am »

This is awesome!

*Dreams of one day having a Garage full of OND designed cabinets

Kuraishi · « **Reply #72 on:** March 18, 2014, 10:05:09 pm »

I saw the green version of this a while back and really liked the design. I don't have much experience, but I took a stab at it. I've really enjoyed building and playing it.

http://imgur.com/a/uPjld

borals · « **Reply #73 on:** March 18, 2014, 11:18:25 pm »

Quote from: Ond on February 21, 2013, 02:53:42 am

Test fit CP and bezel to cab just with tape to make sure everything is nice and square and flush along joins.

This might be a dumb question, but did you cut that bezel using a 45 degree chamfer bit?

That is what I use to do mine, but I swear yours seems sharper and less rounded at the corners. It could also be that my eye are bad

somefunguy · « **Reply #74 on:** February 14, 2017, 10:24:52 pm »

any chance of a pdf on the plans or some measurements please ... I love the design

Superfrog · « **Reply #75 on:** February 15, 2017, 05:49:36 am »

I don't want plans or whatever... I want pictures an stories about the progress

Hope it Will Come very soon

Ond · « **Reply #76 on:** February 15, 2017, 03:14:13 pm »

n3wt0n · « **Reply #77 on:** February 15, 2017, 05:13:07 pm »

Ond,

This looks like another fantastic project! The design is amazing and I hope that you some day find the inspiration and time to complete it.

Ond · « **Reply #78 on:** February 16, 2017, 06:26:31 am »

Ond · « **Reply #79 on:** February 21, 2017, 07:41:48 pm »

Le Chuck · « **Reply #80 on:** February 21, 2017, 10:02:37 pm »

Quote from: Ond on February 21, 2017, 07:41:48 pm

I've made really good progress on this in the last few day's. Pics SOOON.

Like normal person soon or Ond soon? Does the additional "O" denote more time or less?

Ond · « **Reply #81 on:** February 21, 2017, 10:18:30 pm »

Ond · « **Reply #82 on:** February 22, 2017, 02:28:57 pm »

Mike A · « **Reply #83 on:** February 22, 2017, 02:31:05 pm »

sealcouch · « **Reply #84 on:** February 22, 2017, 02:41:42 pm »

This looks insane. It in no way looks like wood. Beautiful bartop you got goin' on here.

jmike · « **Reply #85 on:** February 22, 2017, 08:54:36 pm »

Wow! This looks insane! Can't wait for the painted pics.
Ond are you going to connect the side moldings from the inside?
What are the small holes on the right side for?

Ond · « **Reply #86 on:** February 23, 2017, 01:09:50 am »

DarakuTenshi · « **Reply #87 on:** February 23, 2017, 08:04:59 am »

Quote from: Ond on February 22, 2017, 02:28:57 pm

Ready for paint later today.

You mentioned this coating is Bondo (unless I misunderstood what you were talking about). If so what kind of Bondo is that? I've heard of people using Plastic Bondo, and figured that is what you used here but I cannot find any myself.

Ond · « **Reply #88 on:** February 23, 2017, 11:25:08 am »

DarakuTenshi · « **Reply #89 on:** February 23, 2017, 04:30:34 pm »

Thanks I'll check that out.

coyo5050 · « **Reply #90 on:** February 23, 2017, 11:13:00 pm »

Now this is an interesting bartop!

leapinlew · « **Reply #91 on:** February 24, 2017, 03:45:13 pm »

Now that I see that blue, you only need to integrate white and you'll have R2-D2 colors.

emphatic · « **Reply #92 on:** February 24, 2017, 04:05:42 pm »

Cool, cool, cool.

markc74 · « **Reply #93 on:** February 24, 2017, 04:31:18 pm »

Please come to England and paint my next cab.

I'll buy you a beer.

Richie_jones · « **Reply #94 on:** February 24, 2017, 05:22:54 pm »

Can someone point me to onds paint tutorial, can't find it from the main forum..

Ond · « **Reply #95 on:** February 24, 2017, 05:25:53 pm »

Richie_jones · « **Reply #96 on:** February 24, 2017, 05:27:15 pm »

Thanks

Ond · « **Reply #97 on:** February 24, 2017, 10:28:08 pm »

thePrimativ · « **Reply #98 on:** February 26, 2017, 10:33:33 pm »

WOW

Just WOW!!!

Sent from my iPhone using Tapatalk

Ond · « **Reply #99 on:** March 05, 2017, 06:53:29 pm »

Richie_jones · « **Reply #100 on:** March 06, 2017, 03:03:36 am »

What are the two circuit boards next to the speaker? Also I see your monitor cable is plugged into something?

Ond · « **Reply #101 on:** March 06, 2017, 05:33:43 am »

Richie_jones · « **Reply #102 on:** March 06, 2017, 05:52:17 am »

Great thanks for the info

ballboff · « **Reply #103 on:** March 07, 2017, 12:52:48 pm »

what games is this gonna run? Are you putting in an SSD?

Ond · « **Reply #104 on:** March 07, 2017, 05:34:43 pm »

ballboff · « **Reply #105 on:** March 08, 2017, 04:26:33 am »

awesome! gets my vote!

Ond · « **Reply #106 on:** March 13, 2017, 01:29:08 am »

SpaceHedgehog · « **Reply #107 on:** March 13, 2017, 11:53:57 am »

Stunning.

Superfrog · « **Reply #108 on:** March 13, 2017, 06:54:44 pm »

One of a kind... i love all the details on this masterpiece

Ond · « **Reply #109 on:** March 15, 2017, 07:09:59 am »

thePrimativ · « **Reply #110 on:** March 16, 2017, 03:46:49 am »

Quote from: Ond on February 23, 2017, 11:25:08 am

See my videos in the How to videos thread on the Main Board for lots of details.

I may be a bit thick but I can't seem to find where the Iw to thread is

Richie_jones · « **Reply #111 on:** March 16, 2017, 03:57:07 am »

Mera Peak

That's the you tube channel I watched onds paint tutorials on.
Part 1 was missing though
I think that's where his videos linked to , but I've just checked and all contents gone

PL1 · « **Reply #112 on:** March 16, 2017, 04:02:00 am »

Quote from: thePrimativ on March 16, 2017, 03:46:49 am

Quote from: Ond on February 23, 2017, 11:25:08 am
See my videos in the How to videos thread on the Main Board for lots of details.

I may be a bit thick but I can't seem to find where the Iw to thread is

Ond's videos are in this post of the "Are there "How to Videos" on arcade building?" thread.

EDIT: Parts 2, 3, and 4 play embedded, but part 1 forces you to play it on YouTube because, "This video contains content from UMG."
The videos don't show when you view the "Mera Peak" account, but they are still available.

Scott

Richie_jones · « **Reply #113 on:** March 16, 2017, 04:08:00 am »

Yeah there the ones...
Part 1 not available though

PL1 · « **Reply #114 on:** March 16, 2017, 04:19:15 am »

Quote from: Richie_jones on March 16, 2017, 04:08:00 am

Yeah there the ones...
Part 1 not available though

Click on the "Watch on Youtube" text or the YouTube icon in the lower right corner to watch it on the YouTube site.

Scott

Richie_jones · « **Reply #115 on:** March 16, 2017, 04:45:55 am »

Quote from: PL1 on March 16, 2017, 04:19:15 am

Quote from: Richie_jones on March 16, 2017, 04:08:00 am
Yeah there the ones...
Part 1 not available though
Click on the "Watch on Youtube" text or the YouTube icon in the lower right corner to watch it on the YouTube site.

Scott

Yeah I know..and part 1 isn't available

Ond · « **Reply #116 on:** March 16, 2017, 05:22:00 am »

PL1 · « **Reply #117 on:** March 16, 2017, 05:35:38 am »

Quote from: Richie_jones on March 16, 2017, 04:45:55 am

Quote from: PL1 on March 16, 2017, 04:19:15 am
Quote from: Richie_jones on March 16, 2017, 04:08:00 am
Yeah there the ones...
Part 1 not available though
Click on the "Watch on Youtube" text or the YouTube icon in the lower right corner to watch it on the YouTube site.
Yeah I know..and part 1 isn't available

It plays fine here in the U.S., but it might be restricted in your country due to the "This video contains content from UMG." restriction.

Where are you located?

Quote from: Ond on March 16, 2017, 05:22:00 am

I'll link to a dropbox download in that thread (and here) so you can view part 1 as soon as I've uploaded it to my Dropbox.

Thanks for going above and beyond.

Scott

Richie_jones · « **Reply #118 on:** March 16, 2017, 12:29:56 pm »

I'm in the UK.. vid 1 has never worked but the rest are great. Thanks for the Dropbox link

Nephasth · « **Reply #119 on:** December 31, 2017, 11:07:40 am »

Richie_jones · « **Reply #120 on:** January 02, 2018, 08:08:31 am »

What's happened all ond's posts have gone??

thomas_surles · « **Reply #121 on:** January 03, 2018, 12:44:12 pm »

Quote from: Richie_jones on January 02, 2018, 08:08:31 am

What's happened all ond's posts have gone??

He took his ball and went home.

Richie_jones · « **Reply #122 on:** January 03, 2018, 01:07:47 pm »

Quote from: thomas_surles on January 03, 2018, 12:44:12 pm

Quote from: Richie_jones on January 02, 2018, 08:08:31 am
What's happened all ond's posts have gone??
He took his ball and went home.

Ah well...we all move up one rank!!!

yotsuya · « **Reply #123 on:** January 03, 2018, 01:50:18 pm »

Quote from: Richie_jones on January 03, 2018, 01:07:47 pm

Quote from: thomas_surles on January 03, 2018, 12:44:12 pm
Quote from: Richie_jones on January 02, 2018, 08:08:31 am
What's happened all ond's posts have gone??
He took his ball and went home.
Ah well...we all move up one rank!!!

Get back in line, n00b.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: 0#17 (Read 47997 times)

Nephasth