Main > Project Announcements
Restore: Paperboy: 'Exclusive!' - Restore with enhanced side art
yotsuya:
Between KLOV and the Boneyard, it's pretty easy to find the stuff you need. I've found a replacement coin reject button and a new hinge for the back of Moon Patrol. I also found a replacement 15" vector monitor for an Asteroids cocktail. It takes some digging, but you can find a lot of stuff out there.
BadMouth:
Does this thing play Harley Davidson & L.A. Riders yet?
griffindodd:
--- Quote from: BadMouth on February 07, 2013, 03:42:39 pm ---Does this thing play Harley Davidson & L.A. Riders yet?
--- End quote ---
LOL, nope this is staying dedicated PB
griffindodd:
Question/suggestions on laminating that column.
I plan to basically laminate the entire exterior of this cab and know that it's complicated shape is going to give me a few headaches. I'm pretty confident working with the laminate now I've had a few projects using it, but it's the interior edges that are going to prove difficult as the cab is already built.
In my head it seems to make sense to make a template of the sides of the coin column and the inside areas of the sides that run along the bezel/glass edge. Then use the template to pre-cut the laminate to shape and then contact bond it in place. Because of some of those tight enclosed angles I'm not sure there would be any other reliable way to do it properly?
Thoughts?
mcseforsale:
Rustoleum Painter's Touch UltraCover. I recently had a family member visit and they asked me how long it took me to laminate the cab. It's painted...
http://www.homedepot.com/h_d1/N-5yc1v/R-100208855/h_d2/ProductDisplay?catalogId=10053&langId=-1&keyword=painters+touch&storeId=10051#.URQZaGeMik0
Over some decently prepared primer, using a nice 1/4" nap roller, you'd be hard pressed to tell the difference...
AJ
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version