Main > Everything Else

spiral gumball machine question

(1/2) > >>

uolarethian:
I just picked up a 5' spiral gumball machine made by victor. As far as i can tell i am missing a part, i think its the gum guide. If anyone has one of these machines could you take off the coin mech and snap me a good picture of the inside so I can have a clue of what i am looking for.

Thanks guys.

uolarethian:
I dont think it has to be a victor machine, they all look to have the same basic parts inside.

NiN^_^NiN:
Funny enough I was looking at the mechanisms for gumball machines a few days ago thinking of using it to make a diy vending machine.

I'm not sure if this will help or not as i'm not sure which part you need but hopefully it will.

Hopefully this has what you need.

http://www.houseofhepworths.com/2010/03/16/my-candy-stor/

The coin mech
http://www.gumball-machine.com/blog/wp-content/uploads/2011/03/free-spin-instructions-full-size1.jpg

Diagram of all parts
http://www.gumball.com/images/carousel_gumball_machine_parts.jpg

uolarethian:
Thanks but nope, I have one of the large spiral gumball machines and the piece that is missing only catches the ball after it comes out of the globe and before gets to the internal ramp which sends the ball to the visible spiral ramp.  But thanks for the effort.

Le Chuck:
No idea.  If some parts are indeed interchangeable perhaps you can find what you need in here: http://www.aaglobal.com/images/bulk-vending/bulk-vending-machine-equipment-parts/replacement-parts/replace_parts.pdf

Happy hunting.

Navigation

[0] Message Index

[#] Next page

Go to full version