| Main > Main Forum |
| Best/safest way to move a cabinet? |
| << < (4/4) |
| DeLuSioNal29:
Here's what I do. (I try not to over complicate things and I've moved several) A) Wrap it up in plastic wrap (they go for about $20 or so at Home Depot). This will keep the dust out as well. It's great, because it provides a thin layer of protection from scratching the paint if you bump it up on a doorway. But it still retains it's small shape (no bulky blankets). B) Place a moving blanket in your RAV4, with on 1/4 of it in the car (the rest will be on the floor hanging outside). Have someone go in the car from the inside and pull the blanket while someone on the outside pushes it in. It should slide right in (blanket will slide on carpeting and arcade machine should not move on the blanket). Note: In a RAV 4 you should be able to close the back door if you lay the arcade machine on it's side with the ANGLE OF THE TOP facing the driver's side. Those will give you a few more inches before the top of the machine hits the center console. (Move the passenger seat up). I've fit an Area51 machine in a Suzuki Grand Vitara-XL-7 with the door closed using this method. Good Luck! DeLuSioNaL29 |
| claremont:
Talke a broom handle or wooden dowel and lay it crosswise on on the floor of the vehicle. Tip the game into the vehicle and roll it right in on the broom handle. Any arcade collector worth his salt keeps a broom handle just in case! |
| Navigation |
| Message Index |
| Previous page |