Author Topic: Zippyy Joysticks- Standard Mounting? (Read 3268 times)

mgb · « **on:** October 02, 2012, 04:38:12 pm »

Are Zippyy Joysticks standard bolt pattern for mounting (like a sanwa JLW or Happ) or are they a smaller plate like a Sanwa JLF?

selfie · « **Reply #1 on:** October 02, 2012, 05:23:47 pm »

Can't help with an answer but can help with a pic of a zippyy mounting plate

PL1 · « **Reply #2 on:** October 02, 2012, 06:51:51 pm »

Are Zippyy Joysticks standard bolt pattern for mounting (like a sanwa JLW or Happ) or are they a smaller plate like a Sanwa JLF?

The Zippyys are definitely not the same pattern as Happ Supers shown here.

This photo shows inserts for mounting a Super with a Zippyy on top.

If you turn the Zippyy 90 degrees, the mounting plate almost rests between the inserts.

Scott

mgb · « **Reply #3 on:** October 03, 2012, 07:12:36 am »

Thanks guys,
From photos I thought they weren't standard but couldn't find actual dimensions.

PL1 · « **Reply #4 on:** October 03, 2012, 04:14:42 pm »

Thanks guys,
From photos I thought they weren't standard but couldn't find actual dimensions.

The plate is 2.562" W x 3.822" H.

The center->center distance on the diagonal holes are around 1.7" W x 3.2" H.

Scott


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news