Main > Main Forum
Recoil Kit now available for Aimtrak Gun
<< < (13/16) > >>
JOHN HOWARD:
ahh any charger/ power source will do ehh. Cheers guuys
epicfatigue:
Volts have to match, amps can be higher but not lower.

So if it requires 1.5 but you have a 3amp then 3 amp is perfectly fine.
letraitplat:
Actually I'm having quite a hard time to find a matching PSU, with 36V and 3A, and compliant with europe mains (220/240 volts) and with a long enough cable to provide comfortable gameplay.

I found those but I'm unsure they can be shipped to my place (France) and not even sure they'll be OK for the recoils :

http://www.ebay.com/itm/111154398270
The seller seems to have just this one in stock -_-

http://www.ebay.com/itm/120941755169?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
The cable seems very short...




And some Kodak ones :


Kodak Delta EADP-108AB A Power Supply Adapter 36V 3A



AC Adapter Delta Model EADP-10BBB A 36V DC 3A   
Input: AC 100-240V~ 50/60Hz 1.6A
Output: 36V DC 3A



MODEL :EADP-108BB A
INPUT :100-240V~1.6A 50-60HZ
OUTPUT :36V---3A


Any help / advice welcome
peteski:
Hi guys,

I'm just getting my head around this recoil kit. I have original Namco guns and was wondering are many people using it to hook into the standard namco solenoid setup?

Thanks
Pete
lap:
Hi All

I just purchased the ultimarc guns and recoil kit as well as power supplies off of ebay and have had a very hard time to get it all to work. I am confident in my soldering skills due to many soldered mod chips back in the days for the video game systems. I have bought a total of four power supply units trying to get these solenoids to work. All four are 36 volt. the first set are a made in china unit off of ebay with like a 4.16 amp output. This power supply sets off the solenoid as soon as I plug it in and leaves it engaged thus causing it to overheat. The second set of power supply units are a kodak and have an output of 36v and 1.7 amps. This unit set off the solenoid as soon as I plug it in and then the power supply unit power light turns off and fails to work again.  If I unplug the unit and replug it in, it does the same thing again. Any help is much appreciated here as I am at a lost. Very frustrating experience so far!!
Navigation
Message Index
Next page
Previous page

Go to full version