Main > Main Forum
T-Track and Plexi Overlay
(1/1)
wcndave:
T-Trac is 3/4" right?
Ply/MDF is 3/4"

so that marries up perfectly, however when you have cut and put a plexi overlay on the control panel, that will add 1/8" or so.

How do you pros blend that nicely with the end?

many thanks

Dave
dfmaverick:
5/8" MDF for the CP top only.
PL1:
You can lose the plexi and use a .08" polycarbonate-laminated printed-vinyl overlay on 3/4" MDF instead.


Scott
Navigation
Message Index

Go to full version